Re: problem - Conexant: RX FIFO OVERRUN (Bus Latency)
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Message-ID | <[email protected]> |
Hi, this error is generated when the driver is unable to process the sound in real time and had to breakdown the connection because of that. Please make sure that you do not have a process on your machine which is attempting to use 100% CPU and/or I/O, this is a typical cause of this problem. It is possible that you will get an additional hint to solve the problem by taking a look at the output of the 'cat /proc/driver/h*/0/lastcallstatus' command in a root shell. This command should be used after you have been disconnected and before you attempt a new connection. If you have a valid license installed, it is possible that one of the following init. strings will fix the problem: --- AT &F \N5 AT &F \N0 AT &F W1 +ER=1; +DR=1; +MS=V90,0 AT &F W1 +ER=1; +DR=1; +MS=V90,1 AT &F W1 +ER=1; +DR=1; +MS=V34,0 AT &F W1 +ER=1; +DR=1; +MS=V34,1 AT &F W1 +ER=1; +DR=1; +MS=V32B,0 AT &F W1 +ER=1; +DR=1; +MS=V32B,1 AT &F W1 +ER=1; +DR=1; +MS=V32,0 AT &F W1 +ER=1; +DR=1; +MS=V32,1 --- Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Daniel Pottumati wrote: > > Dear support, > > What does this mean and how do I fix: > > kernel: Conexant: RX FIFO OVERRUN (Bus Latency) - FIFOE<3> > kernel: Conexant: TX FIFO UNDERRUN (Bus Latency) - FIFOE<3> > > This comes up in my logs and the connection breaks down. > Running SuSE 10.1, kernel 2.6.16.13-4-smp, (Old) Dell Inspiron Laptop > Please help. > > > ------------------------------------------------------------------------ > > _______________________________________________ > hsflinux mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/hsflinux