Re: no RING

Hi,

if you are behind a BPX or similar equipment, please try without it to 
see if there is a difference.

Please also try to use 'AT &F' as the only init. string just to make 
sure it's not the problem.

You should also test under Windows on the same system just to make sure 
that the ring detection is working fine. If it is the case, please send 
at [email protected] the INF and CTY files if the Windows XP driver, 
it might help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Marius Bronstring wrote:
> Hello,
>  
> My modem does not return the expected RINGs during incoming call's. 
> Searching through the mail list I found that other people have the same 
> problem. I've selected the right country "NETHERLANDS" (7B) and check it 
> with the following commands:
>  
> AT+GCI?
> +GCI: 7B
>  
> OK
> ATI9
> NETHERLANDS
> OK
>  
> Like the others dailing out works fine, I can dail my mobile. If I dail 
> the modem with my mobile and give the ATA command it answers, there is 
> just no RING return from the modem.
>  
> Is there a solution for this problem?
>  
> Thanks in advance,
>  
> Marius