Re: The Lenovo OEM driver from Linuxant
Hamid <[email protected]> Tue, 13 Mar 2007 02:18:40 +0330
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Message-ID | <[email protected]> |
Sorry I forgot the files for openSUSE 10.2. Also as a note, in both cases the kernel-sources are installed. Any idea how I can the driver working? Thanks, Hamid _______________________________________________ hsflinux mailing list [email protected] https://www.linuxant.com/mailman/listinfo/hsflinux
hsfdiag-openSUSE10.2.txt
(text/plain, 167.7 KB) - not displayed
hsf-openSUSE-rpm.txt
(text/plain, 1.8 KB)
Hammer:/windows/d/linux/install/ibm # rpm -ihv l79m05ww.rpm
warning: l79m05ww.rpm: Header V3 DSA signature: NOKEY, key ID 5dfbf7dc
Preparing... ########################################### [100%]
Conexant HSF softmodem driver, version 7.47.00.01oem
If you need assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
No pre-built modules for: SuSE-10.2 linux-2.6.18.2-34-default i686-SMP
Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)
WARNING: the kernel version () defined in
/lib/modules/2.6.18.2-34-default/build/include/linux/version.h
does not match the currently running kernel (2.6.18.2-34-default)
The cause of this problem is an incorrect kernel source path.
Please check that /lib/modules/2.6.18.2-34-default/build points to the right tree.
The cause of this is usually a missing or unconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).
However, proper /boot/config-2.6.18.2-34-default was found.
First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.
The Linux kernel can then be reconfigured by running "make menuconfig"
under the kernel source directory (usually /usr/src/linux).
Verify that the proper options for your system are selected.
Then compile and install your new kernel (for more information about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run "hsfconfig".
error: %post(hsfmodem-7.47.00.01oem-1.i386) scriptlet failed, exit status 1
Hammer:/windows/d/linux/install/ibm #