Re: HSF modem drivers load, but can't talk to modem

After installing the 16K stack kernel and rebuilding the drivers, I
still seem to be having the same problem.  Attached is the hsfdiag.txt
report.  Are there any motherboard BIOS options relating to the USB
controller that I should look to set? If I can get the driver working
I'll certainly buy licenses ( need the support and the 56k functionality!)

Linuxant support (Jonathan) wrote:
> Hi,
>
> the driver is having serious problems, you can take a look at 'dmesg'
> to see the error messages generated.
>
> The HSF driver is known to require more than 4K of kernel stacks to
> operate correctly on some setups. The kernel you are using only have
> 4K of stacks, so it is a possible source of the problem. You should
> try with one of the replacement kernels (compiled with 16K stacks) we
> have available at:
>

-- 
Mike Russo
ReadQ Systems, Inc.
(212) 425-3680 

Random quote of the last-time-I-ran-bash:
It was the Law of the Sea, they said.  Civilization ends at the waterline.
Beyond that, we all enter the food chain, and not always right at the top.
		-- Hunter S. Thompson

_______________________________________________
hsflinux mailing list
[email protected]
https://www.linuxant.com/mailman/listinfo/hsflinux