[PATCH v5 07/28] mtd: spi-nor: winbond: Normalize names

Winbond chips cannot just be named eg. "W25Q02JV". There are always more
letters after that name, some of them matter.

- W is the Winbond prefix
- 25Q is the type of device
  -> 25Q indicates a quad capable SPI NOR
  -> 25H indicates an automotive grade chip
- 02J is the density
  -> in this case 2Gib
- V is the voltage
  -> V means 3.3V
  -> W means 1.8V
- The next letters (either 2 or 3 letters) are completely irrelevant for
  the software and purely indicate the hardware package.
- The penultimate letter is the temperature grade
  -> I for Industrial grade
  -> J means "above" industrial
- Q, N or M indicate factory states (like QE=1) and also the DTR
  capability.
  -> Q and N typically have the same IDs
  -> M chips typically have a different ID

As a result, W25Q01NWxxIQ is irrelevant and would better be named
W25Q01NW-Q, W25Q02JV is irrelevant and would better be named W25Q02JV-M,
etc.

Make that list uniform before adding more IDs/names.

Signed-off-by: Miquel Raynal <[email protected]>
Reviewed-by: Michael Walle <[email protected]>
---
 drivers/mtd/spi-nor/winbond.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 662a022d36e7..03e59ff3228f 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -301,7 +301,7 @@ static const struct flash_info winbond_nor_parts[] = {
 		.name = "w25q512nwq",
 		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
 	}, {
-		/* W25Q01NWxxIQ */
+		/* W25Q01NW-Q */
 		.id = SNOR_ID(0xef, 0x60, 0x21),
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 |
 			 SPI_NOR_4BIT_BP | SPI_NOR_HAS_CMP,
@@ -334,7 +334,7 @@ static const struct flash_info winbond_nor_parts[] = {
 		.id = SNOR_ID(0xef, 0x70, 0x19),
 		.name = "w25q256jvm",
 	}, {
-		/* W25Q02JV */
+		/* W25Q02JV-M */
 		.id = SNOR_ID(0xef, 0x70, 0x22),
 		.fixups = &winbond_nor_multi_die_fixups,
 	}, {
@@ -372,28 +372,28 @@ static const struct flash_info winbond_nor_parts[] = {
 		.name = "w25q512nwm",
 		.otp = SNOR_OTP(256, 3, 0x1000, 0x1000),
 	}, {
-		/* W25Q01NWxxIM */
+		/* W25Q01NW-M */
 		.id = SNOR_ID(0xef, 0x80, 0x21),
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 |
 			 SPI_NOR_4BIT_BP | SPI_NOR_HAS_CMP,
 	}, {
-		/* W25Q02NWxxIM */
+		/* W25Q02NW-M */
 		.id = SNOR_ID(0xef, 0x80, 0x22),
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 |
 			 SPI_NOR_4BIT_BP | SPI_NOR_HAS_CMP,
 		.fixups = &winbond_rdcr_fixup,
 	}, {
-		/* W25H512NWxxAM */
+		/* W25H512NW-M */
 		.id = SNOR_ID(0xef, 0xa0, 0x20),
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 |
 			 SPI_NOR_4BIT_BP | SPI_NOR_HAS_CMP,
 	}, {
-		/* W25H01NWxxAM */
+		/* W25H01NW-M */
 		.id = SNOR_ID(0xef, 0xa0, 0x21),
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 |
 			 SPI_NOR_4BIT_BP | SPI_NOR_HAS_CMP,
 	}, {
-		/* W25H02NWxxAM */
+		/* W25H02NW-M */
 		.id = SNOR_ID(0xef, 0xa0, 0x22),
 		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 |
 			 SPI_NOR_4BIT_BP | SPI_NOR_HAS_CMP,

-- 
2.54.0