Re: wg511 trouble: PCI: ... unknown header 7f

Hi John,

I did have similar problems on my Acer Travelmate 613TXC. I solved the
problem by using the boot-parameters 'pci=noacpi,scanbus,lastbus=9' . 
You can place it in your lilo.conf file. For more details have a look at
/usr/src/linux/Documents/kernel-params.txt (or something similar, I am
working on a different computer right now).

I hope this helps

Kasper

[email protected] schrieb:

>I'm running 2.6.2 on an IBM TP600 and am trying to make a Netgear
>WG511 work.
>
>When I insert the card I get:
>
>PCI: ... device has unknown header type 7f, ignoring.
>
>If I boot a 2.4 kernel on it, it shows up in lspci as 
>ffff:3890 1385:4800 (of course 0xffff is a bogus vendor id)
>
>This seems like a pretty low-level problem;  seems like it could be 
>either the card or the PCMCIA or BIOS in my laptop.  Any ideas?
>
>
>
>
>thanks
>john
>
>_______________________________________________
>Prism54-users mailing list
>[email protected]
>http://prism54.org/mailman/listinfo/prism54-users
>
>  
>

-- 
+-----------------------------------------------------------------------+
| Dr. Kasper D. Fischer             <[email protected]> |
| Ruhr-Universität Bochum                                               |
| Institut für Geologie, Mineralogie und Geophysik                      |
| NA 3 / 174                        Tel: +49 234 3227574                |
| D-44780 Bochum                    Fax: +49 234 3214181                |
| Germany                           www.geophysik.ruhr-uni-bochum.de    |
+-----------------------------------------------------------------------+