Re: Measure throughput
Rob Gipman <[email protected]>
| Newsgroups | gmane.linux.drivers.prism54.user |
|---|---|
| Message-ID | <[email protected]> |
Cricket can also be used Graphs for x.x.x.x Sitecom Wireless Network PCI adapter 54Mbps WL-110i (no hostname) 192.168.0.1 54.0 MBits/s ethernetCsmacd Values at last update: Average bits in (for the day): *Cur*: 159.88 kbits/sec *Avg*: 17.91 kbits/sec *Max*: 235.53 kbits/sec Average bits out (for the day): *Cur*: 4.05 kbits/sec *Avg*: 2.72 kbits/sec *Max*: 53.83 kbits/sec Last updated at Sun Feb 22 13:40:17 2004 Bjoern Bendix wrote: >Hello, > >You can use MRTG to do this. > >Bye > Bjoern > >Am Samstag, 21. Februar 2004 12:31 schrieb Thomas Watz: > > >>Hi list, >> >>I would like to measure my throughput with the prism driver. Is there any >>preferred way to do this? >> >>Any hint is appreciated >> >>Thanks Thomas >> >>_______________________________________________ >>Prism54-users mailing list >>[email protected] >>http://prism54.org/mailman/listinfo/prism54-users >> >> > > >