Re:slackware 9.1 + kernel 2.6.5 doesn't work

Hi !

I use the same config as you (slack 9.1 + 2.6.5) and
everything works great with my peabird pcmcia card...

Does the module prism54 load cleanly with a line in the syslog ?
Before doing ifconfig eth1 up, check with iwconfig that your
card is detected.

Cheers.
Jérôme

> hi
> i've compiled a new 2.6.5 kernel on my slackware 9.1 with a
smc2802 pci card
> but  it doesn't work!! :( 
> i've tried more configuration but i had obtained nothing good.
> The firmware.agent and isl3890 are in the right position
(i've a 2.4.25 prism 
> patched kernel too, and it works great) but when i do
ifconfig eth1 up this 
> is the output:
> # ifconfig eth1 up 
> SIOCSIFFLAGS: No such file or directory
> 
> and this from #cat /var/log/syslog :
> Apr 14 14:44:28 dezaktop kernel: prism54: request_firmware()
failed for 
> 'isl3890'
> Apr 14 14:44:28 dezaktop kernel: eth1: could not upload
firmware ('isl3890')
> 
> Do You Have any ideas?
> 
> Thanks in advance 
> Nando
> 
> P.S.: i've attached my 2.6.5 .config file 
> P.P.S.:I'm sorry for my very bad english :)
> 
> 

Accédez au courrier électronique de La Poste : www.laposte.net ; 
3615 LAPOSTENET (0,34€/mn) ; tél : 08 92 68 13 50 (0,34€/mn)