Re: still can't load firmware
[email protected] (Luis R. Rodriguez)
| Newsgroups | gmane.linux.drivers.prism54.user |
|---|---|
| Organization | Rutgers University Student Linux Users Group |
| Message-ID | <[email protected]> |
Ah I didn't see this thread before I replied. This is bizarre.. What's the out of output1.txt and output2.txt in: rmmod prism54 dmesg -c > /dev/null modprobe prism54 dmesg -c | tee output1.txt ifconfig eth0 up dmesg -c | tee output2.txt Luis On Sat, Jul 03, 2004 at 10:45:56PM +0200, Franco wrote: > > Sizes for firmware are : > > 1.0.4.3 - 93996 > > 1.0.3.0 - 92476 > > Yes, I do confirm. But I also gave a try to the the firmware supplied > with the card, which is 91020 bytes long. > > > Have you got /etc/hotplug/firmware.agent in place ? > > Yes, it is > > > Is it executable ? > > yes... 755 > > > You got /sys mounted ? > > Yes, it is mounted n fstab with: > > none /sys sysfs defaults 0 0 > > and ls -l /sys says: > > total 0 > drwxr-xr-x 31 root root 0 Jun 27 2004 block > drwxr-xr-x 8 root root 0 Jun 26 23:13 bus > drwxr-xr-x 18 root root 0 Jun 26 23:13 class > drwxr-xr-x 6 root root 0 Jun 27 2004 devices > drwxr-xr-x 3 root root 0 Jun 27 2004 firmware > drwxr-xr-x 30 root root 0 Jun 26 23:13 module > drwxr-xr-x 2 root root 0 Jun 27 2004 power > > > Franco > > > _______________________________________________ > Prism54-users mailing list > [email protected] > http://prism54.org/mailman/listinfo/prism54-users -- GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84 A34A 6ADD 4937 E20A 525E