Re: PCI IDs
[email protected] (Luis R. Rodriguez)
| Newsgroups | gmane.linux.drivers.prism54.user |
|---|---|
| Organization | Rutgers University Student Linux Users Group |
| Message-ID | <[email protected]> |
It may be the newer model, which doesn't work with our driver :(. Luis On Mon, Aug 16, 2004 at 09:22:59PM +1000, nornagon wrote: > Ugh. > > Ok, I edited islpci_hotplug.c and added the definition for my card, > then recompiled the kernel. Then I put the latest firmware in > /usr/lib/hotplug/firmware. Now ifconfig eth0 up should, in theory, > work. But apparently eth0 doesn't exist :'( > > On Sun, 15 Aug 2004 04:18:49 -0400, Luis R. Rodriguez > <[email protected]> wrote: > > > > > > On Sun, Aug 15, 2004 at 10:29:48AM +1000, nornagon wrote: > > > I recently bought an SMC2802W, and I am attempting to make it work on > > > a new system, installed from the debian CDs (stable). The odd thing > > > is, though, lspci -vn tells me that the card's PCI ID is 1260:f890 and > > > its subsystem ID is 1113:ee03. The PCI Id ought to be 1260:3890 and > > > the subsystem ID ought to be 113:ee03. Is this due to a software or > > > hardware problem? Is there a way I can fix it? If not, is there a > > > workaround? > > > > > > Thanks muchly for your help. > > > > Could be a hardware problem as this is the first SMC2802W card I hear > > with that PCI ID. You can make prism54 work with it by changing the PCI > > ID table. The attached patch does this. You apply it by going > > to the prism54 dir (kernel or cvs code, the same dir islpci_hotplug.c is) > > and doing: > > > > patch -p0 < /path/to/bogus.diff > > > > Luis > > > > -- > > GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84 A34A 6ADD 4937 E20A 525E > > > > > > > > > -- > - nornagon > http://www.nornrock.com > _______________________________________________ > Prism54-users mailing list > [email protected] > http://prism54.org/mailman/listinfo/prism54-users -- GnuPG Key fingerprint = 113F B290 C6D2 0251 4D84 A34A 6ADD 4937 E20A 525E