Re: RealTek 8201L PHY drivers
John Palmieri <[email protected]> 06 Sep 2002 17:53:11 -0400
| Newsgroups | gmane.linux.drivers.realtek.devel |
|---|---|
| Message-ID | <1031349195.19594.11.camel@dorathy> |
Well it looks like it is an nVidia ethernet card. Why can't all cheap 10/100 ethernet cards work with one driver? Is nVidia trying to make Linux propriatary? Anyway it looks like nVidia has drivers though I am not sure if they are source drivers or just gateway source drivers (like their video drivers) that allows a binary to hook up with the kernel. I'll still try running the rtl8139-diag program. Perhaps it will provide some information should the nVidia sources not be GPL compatable. It realy urks me not being able to access a network card on install. Next time I will check the Linux Hardware DB more closely. -- J5 On Fri, 2002-09-06 at 11:10, Donald Becker wrote: > On 6 Sep 2002, John Palmieri wrote: > > > On Fri, 2002-09-06 at 10:45, Donald Becker wrote: > > > On 6 Sep 2002, John Palmieri wrote: > > > > Ethernet Controller: Nvidia Unkown Device(Rev 194) > > > > Vendor id=10de Device id=1c3 > > > > > > That's not a standard ID for a known NIC. > > > It may be a new NIC type from Nvidia (which is well known for not > > > providing Linux support), or a standard chip with a substitute ID > > > programmed into the EEPROM. > .. > > > Try running 'rtl8139-diag -af -p 0xd800'. It's probably not a Realtek > > > chip, but I might be able to tell if it's similar to a known NIC. > > > I was hoping to install from the network. Where do I get the > > rtl8139-diag program or source? Does it come with Debian or can I grab > > it from scyld.com? > > http://www.scyld.com/diag/index.html > ftp://ftp.scyld.com/pub/diag/ > > > -- > Donald Becker [email protected] > Scyld Computing Corporation http://www.scyld.com > 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters > Annapolis MD 21403 410-990-9993