Re: initialization problem under 2.4.20

On Thu, 20 Mar 2003, d wrote:

> Here is the info from (in order) rtl-diag, dmesg, lsmod, and lspci.   
> Like I said, the version that came with RedHat7.2 works fine, so I 
> don't think it can be a hardware problem.  Thanks.
...
> dmesg
> ************************
> 8139too Fast Ethernet driver 0.9.26
> PCI: Found IRQ 11 for device 01:04.0
> PCI: Sharing IRQ 11 with 00:1f.1
> rtl8139_init_board: PIO region size == 0x100
> rtl8139_init_board: MMIO region size == 0x100
> Unable to handle kernel paging request at virtual address 015c3005
>  printing eip:
> c0116f46

Nope, not a hardware problem.
Nor is it a problem with IRQ or I/O mapping.
It appears that the device driver crashed.

...
> Process modprobe (pid: 432, stackpage=ded93000)

And it crashed in the initialization...

This appears to be a bug in the 8139too driver...

-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993