Re: How do I convert the filtered snoopypro output to the header file arrays?

Le jeudi 24 janvier 2008 08:27, Alex White a écrit :
> On Wed, 23 Jan 2008 17:44:06 +0900, Serge A. Suchkov <[email protected]>
>
> wrote:
> > You can convert zc0302plugin format to gspca format using this
> > http://mgspca.e1.bmstu.ru/zc030x_to_gspca.sh script or you can convert
> > init sensor data directly from windows *.inf file using this
> > http://mgspca.e1.bmstu.ru/zc030x.inf2gspca.sh script (for zc30x bridge
> > only)
>
> Thanks very much :)
>
> What I have discovered is that the windows .inf file contains information
> for these four sensors:
> GC0305
> OV7648
> PO2030
> ADCM2700
>
> But using the regmon technique, I found that the windows driver is using
> the HV7131B sensor. I confirmed this again today.
Be sure in the inf file you don't have something like
HV7131B= ****/GC0305
for example that mean windows used HV7131B name for the GC0305 data ;-)
>
> But the .inf file does not contain data for this sensor!
>
> As I mentioned earlier, I tried using the HV7131B sensor data internal to
> gspca, but this didn't work.
<snip>
regards
-- 
Michel Xhaard
http://mxhaard.free.fr

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/