Re: gspcav1-20071224 parameters for Labtec Webcam pro

Thanks for replay. I tried to experiment with my Webcam but did not get 
any better result.
As I see from today postings, more people have problems with overbright 
pictures from Vimicro ZCxxx chipset.
It seems, that the camera has low and very narrow sensitivity, but the 
windows software still gives better picture and allows to to chane so 
called exposure time.

I compiled spcagui and would like to play with different settings, but 
it does not work on my Linux distributions.

Jansuz

Catimimi wrote:
> Hello,
> I own two of these webcams, which work fine on two different linux
> openSUSE 10.3 boxes (32bits and 64bits) with gspcav1compiled from Michel
> sources. No parameter is needed. Take care to connect it directly on the
> motherboard. Some USB hubs are not convenient for multimedia devices.
> Furthermore your USB port has to deliver 500 mA, so if you use a hub, it
> has to have its own power supply.
> Ready to help if I'm able to.
> Michel.
> 
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Spca50x-devs mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/spca50x-devs
> 

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/