Re: Sweex "foldable webcam" support

Hi silvio.
There's a patch for 0c45:6011  in the list, you have to patch files from 
gspcav1-20071224.tgz
The sensor should be OV6650, you should check what sensor you webcam 
really have.
By the way, you are using driver SN9C102 , try gspcav with the patch and 
remember to remove sn9c102 driver.

That camera with OV6650 sensor was working fine on 320x240 (  sensor is 
QCIF/CIF ).


 >Silvio Moioli wrote:
> Hi,
>      my name's Silvio Moioli and I recently bought a Sweex "foldable 
> webcam" (vendor id: 0x0C45, product id: 0x6011).
>
> dmesg output:
> [179.380000] usb 1-1: new full speed USB device using uhci_hcd and address 3
> [179.540000] usb 1-1: configuration #1 chosen from 1 choice
> [179.708000] Linux video capture interface: v2.00
> [179.912000] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.44
> [179.916000] usb 1-1: SN9C10[12] PC Camera Controller detected (vid:pid 
> 0x0C45:0x6011)
> [180.020000] usb 1-1: No supported image sensor detected for this bridge
>
> lsusb:
> Bus 001 Device 003: ID 0c45:6011 Microdia
>
> Is there any chance it will be supported by the driver? Is there 
> anything I can do to test it?
>
> Thanks in advance,
>   


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/