Re: Minor problems with 046d:08a2 (Labtec Webcam Pro)

On Sun, 2008-05-25 at 20:53 +0200, Rumi Szabolcs wrote:
> Hi!

Hi Rumi,


> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: USB GSPCA camera found.(ZC3XX) 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: [spca5xx_probe:4275] Camera type JPEG 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/gspca_core.c: [spca50x_configure:2633] video_register_device succeeded
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zc3xx_config:576] Sensor ID:9
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:203] sensor answer1  170 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:278] check sensor id  0x0000 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  0 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:278] check sensor id  0x0000 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  0 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:278] check sensor id  0x0000 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  0 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  0 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:278] check sensor id  0x0000 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  0 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:278] check sensor id  0x0000 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  0 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:278] check sensor id  0x0001 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zcxx_probeSensor:286] sensor answervga  89 
> /usr/src/tmp/portage/media-video/gspcav1-20071224/work/gspcav1-20071224/Vimicro/zc3xx.h: [zc3xx_config:654] Find Sensor PAS202BCB
	[snip]

Thank you for the trace, but I misunderstood your request: I am working on
gspcav2, not v1 :)

> > You're a lucky guy: I did not succeed in having camorama working!
> 
> Well, here is camorama-0.19 and it does work generally :-)
	[snip]

Not with the v2!

So, would you switch to gspca v2? If so, I could help you, but some
applications will not work anymore (as camorama - also, I'm leaving for
some days; I'll be back on Monday June 9).

Cheers.

-- 
Ken ar c'hentañ |             ** Breizh ha Linux atav! **
Jef             |               http://moinejf.free.fr/



-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Spca50x-devs mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/spca50x-devs