PATCH: gspca-mercurial OV7630 light frequency filter
"Andoni Zubimendi" <[email protected]> Wed, 16 Jul 2008 20:53:26 -0300
| Newsgroups | gmane.linux.drivers.spca50x.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi! This patch adds the light frequency filter to the OV7630 sensor in my Webcam. Also this patch adjust the exposure setting in the sensor, reading the datasheet, this sensor has the 2 LSB of the Automatic Exposure Control in the register 76. Regards, Andoni ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Spca50x-devs mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/spca50x-devs
ov7630-lightfrequency.patch
(text/x-patch, 1.7 KB)
diff -r 52caa9704f42 linux/drivers/media/video/gspca/sonixb.c
--- a/linux/drivers/media/video/gspca/sonixb.c Wed Jul 16 17:29:11 2008 +0200
+++ b/linux/drivers/media/video/gspca/sonixb.c Wed Jul 16 20:42:17 2008 -0300
@@ -719,6 +719,14 @@
i2c[1] = sd->sensor_addr;
i2c[3] = reg10;
i2c[4] |= reg11 - 1;
+ if (sd->sensor == SENSOR_OV7630_3) {
+ __u8 reg76 = reg10 & 0x03;
+ reg10 >>= 2;
+ __u8 i2c_reg76[] = {0xa0, 0x21, 0x76, 0x00,
+ 0x00, 0x00, 0x00, 0x10};
+ if (i2c_w(gspca_dev, i2c_reg76) < 0)
+ PDEBUG(D_ERR, "i2c error exposure");
+ }
if (i2c_w(gspca_dev, i2c) < 0)
PDEBUG(D_ERR, "i2c error exposure");
break;
@@ -731,12 +739,13 @@
struct sd *sd = (struct sd *) gspca_dev;
switch (sd->sensor) {
- case SENSOR_OV6650: {
+ case SENSOR_OV6650:
+ case SENSOR_OV7630_3: {
/* Framerate adjust register for artificial light 50 hz flicker
compensation, identical to ov6630 0x2b register, see ov6630
datasheet.
0x4f -> (30 fps -> 25 fps), 0x00 -> no adjustment */
- __u8 i2c[] = {0xa0, 0x60, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10};
+ __u8 i2c[] = {0xa0, 0x00, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10};
switch (sd->freq) {
default:
/* case 0: * no filter*/
@@ -744,9 +753,10 @@
i2c[3] = 0;
break;
case 1: /* 50 hz */
- i2c[3] = 0x4f;
+ i2c[3] = (sd->sensor == SENSOR_OV6650)? 0x4f:0x8a;
break;
}
+ i2c[1] = sd->sensor_addr;
if (i2c_w(gspca_dev, i2c) < 0)
PDEBUG(D_ERR, "i2c error setfreq");
break;
@@ -830,7 +840,7 @@
sd->sensor_addr = 0x21;
sd->fr_h_sz = 18; /* size of frame header */
sd->sensor_has_gain = 1;
- sd->sd_desc.nctrls = 4;
+ sd->sd_desc.nctrls = 5;
sd->sd_desc.dq_callback = do_autogain;
sd->autogain = 0;
break;