Logitech QC Connect (046d:08d9) gspcav2 problems

Hello!

A friend of mine has got a Logitech QC Connect cam which has been
working seamlessly with the gspcav1 module. With gspcav2 it does not.

What happens is the following:

2.6.27-gentoo-r7:

- kernel detects cam, loads zc3xx driver
- /dev/video0 present
- Skype has dynamic garbage (not just white noise but some greenish crap) 
- Cheese shows a video test screen instead of the cam video

2.6.28-gentoo:

- kernel detects cam, loads zc3xx driver
- /dev/video0 present
- Skype drops call after trying to start video
  (video window resizes then drops)
- Cheese shows a video test screen

dmesg from 2.6.28:

gspca: main v2.3.0 registered
gspca: probing 046d:08d9
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe sensor -> 11
zc3xx: Find Sensor HV7131R(c)
gspca: probe ok
usbcore: registered new interface driver zc3xx
zc3xx: registered
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe 2wr ov vga 0x0000
zc3xx: probe 2wr ov vga 0x0000

Please someone fix that... we liked the cam ;)

Thanks,
Sab

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword