Re: Bizarre Linksys PCMPC200 problem

On Mon, 5 May 2003, Matthijs Vrolijk wrote:

> I'm having some trouble getting a Linksys PCMPC200 (v2 I think) to work
> in a Toshiba Satellite Pro 490CDT. The kernel picks up the card during
> boot, and lspci says it's definitely there:

What driver version are you using?
What is the detection message?

> 12:00.0 Ethernet controller: Linksys: Unknown device ab08 (rev 11)
> 	Subsystem: Linksys: Unknown device ab08
...
> The tulip driver won't pick it, claiming the usual 'no such device'.
> Here's what tulip-diag says:

This is an ADMtek Centaur-C.  The modifications in tulip driver
distributed with most 2.4 kernel versions are flawed, and that driver
will not work with this chip.  You will need the unmodified driver from
Scyld.

> tulip-diag.c:v2.16 12/17/2002 Donald Becker ([email protected])
>  http://www.scyld.com/diag/index.html
> Assuming a ADMtek AL985 Centaur (Linksys CardBus v2) adapter at 0x4000.
> ADMtek AL985 Centaur (Linksys CardBus v2) chip registers at 0x4000:

-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
914 Bay Ridge Road, Suite 220		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993

_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip