[Fwd: Re: Driver conflicts - force loading dmfe after tulip? - SOLVED]

-----Forwarded Message-----
From: Marius Kjeldahl <[email protected]>
To: Marius Kjeldahl <[email protected]>
Subject: Re: [tulip] Driver conflicts - force loading dmfe after tulip? - SOLVED
Date: Wed, 24 Sep 2003 20:18:37 +0200

Found a solution:

* Make sure dmfe is loaded BEFORE the tulip driver, and switch the
cables (since "old" eth1 now becomes eth0 and "old" eth0 now becomes
"eth1"). This is done by making sure dmfe is listed before tulip/3c59x
in modules.conf .

I have not been able to confirm that this solves the problem with the
Davicom using the tulip driver under load problem, but at least I know
the Davicom driver is being loaded (and probably) used. Also, my "old"
eth1 side of the net has less traffic, so chances are I will not be bit
by the "under load" issue anyway, since Davicom now serves the
low-traffic part of my network.

Marius K.

On Wed, 2003-09-24 at 18:47, Marius Kjeldahl wrote:
> In one machine I have a 3com card using the tulip driver as eth0 and a
> Davicom DM9102 card as eth1. Everything has been working fine with my
> 10mbit switch. Today I upgraded to 100mbit, and the Davicom card shuts
> down under heavy load with messages like:
> 
> NETDEV WATCHDOG: eth1: transmit timed out
> eth1: transmit timed out, switching to MII media.
> 
> Does anybody know how I can force my system to use the dmfe driver for
> eth1 even after the tulip driver has been loaded for eth0?
> 
> I've tried "alias eth1 dmfe" in modules.conf, but it does not seem to
> work (it seems tulip is being used for both devices after being loaded)?
> 
> Is the only way to comment out Davicom related settings in the tulip
> driver source?
> 
> Thanks,
> 
> Marius K.
> 
> 
> _______________________________________________
> tulip mailing list, [email protected]
> To change to digest mode or unsubscribe visit
> http://www.scyld.com/mailman/listinfo/tulip

_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip