tulip and alpha error kernel 2.4.22

Hi all .

i have one alpha lx164 with debian (woody) and kernel 2.4.22.

#uname -a
Linux alpha 2.4.22 #7 Thu Nov 27 07:13:47 UYT 2003 alpha unknown

with a netgear ethernet
#lspci -vv
00:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
[FasterNet] (rev 22)
	Subsystem: Netgear FA310TX Fast Ethernet
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 96 (5000ns min, 10000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 18
	Region 0: I/O ports at 8000 [size=128]
	Region 1: Memory at 000000000a854000 (32-bit, non-prefetchable)
[size=128]
	Expansion ROM at 000000000a800000 [disabled] [size=256K]

when i start the interface with linux tulip driver i get 

Nov 27 07:40:55 alpha kernel: eth0: (1) System Error occured (1)
Nov 27 07:40:55 alpha last message repeated 16 times
Nov 27 07:40:55 alpha kernel: eth0: (2) System Error occured (1)
Nov 27 07:40:55 alpha last message repeated 15 times

many times and i have to reset the server.

and with de4x5 driver i get 
Nov 27 11:36:13 alpha kernel: eth0: Setup frame timed out, status
fc922000
Nov 27 11:36:13 alpha kernel: eth0: Setup frame timed out, status
fc902000
Nov 27 11:39:04 alpha kernel: eth0: media is 100Mb/s.

but it do not work

with scyld tulip driver i get the same error.

with kernel 2.2.20 works fine.

any idea?

Tks


_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip