RE: Unable to ping between different vlans

Hi,
    first be sure your hub/switch supports vlan feature.Then it need to be
configured.
    Once you have done this let me know of the status.
 

-----Original Message-----
From: Manish Jain [mailto:[email protected]]
Sent: Friday, September 09, 2005 3:44 PM
To: VLAN
Subject: [VLAN] Unable to ping between different vlans


Hi,
I created a VLAN with vlan-id vlan10 using the utitlity vconfig which uses
the module 802.1q. This vlan was configured as 172.19.0.1
<http://172.19.0.1>  with subnet  mask 255.255.0.0 <http://255.255.0.0>  .
This vlan was implemented over eth0. Now i have a laptop which i connected
to eth0 via a hub.  This laptop was configured as : 
ifconfig eth0 172.19.0.4 <http://172.19.0.4>  netmask 255.255.0.0
<http://255.255.0.0>  up 
route add 172.19.0.4 <http://172.19.0.4>  172.19.0.1 <http://172.19.0.1>  
with the objective of making my vlan10 as the gateway of this machine.
Now this laptop is unable to ping the supposed gateway 172.19.0.1
<http://172.19.0.1>  and vice-versa.
Pls help,
thanks,
Manish

-- 
Manish Jain
IIIT Hyderabad

_______________________________________________
Vlan mailing list
[email protected]
http://www.lanforge.com/mailman/listinfo/vlan