Re: Re: vlan and iptables

Hi

Install with everything using FC4
with intel cards

may be you can use instead MARK ..use Classify
works well

hare
----- Original Message ----- 
From: <[email protected]>
To: "Linux 802.1Q VLAN" <[email protected]>
Sent: Tuesday, September 27, 2005 2:14 PM
Subject: [VLAN] Re: vlan and iptables


> George Ross writes:
>>> >>>> Why doesn't iptables works with vlans?
>>> >>>> iptables -t mangle -A FORWARD -i eth0 -o eth1.11 -j MARK --set-mark 
>>> >>>> 4
>>
>> It does for us, though I don't think we've tried the mangle table.
>> iptables-1.2.7a-2 with kernel-2.4.20-31.9_v1_dice_1, and also 
>> iptables-1.2.11-3.1.FC3 with kernel-2.6.12-1.1372_FC3.  I think the only 
>> slightly non-default thing we've done is to have set
>> VLAN_NAME_TYPE=VLAN_PLUS_VID_NO_PAD.
>
> I change the vlan name to VLAN_PLUS_VID_NO_PAD, but my vlan's name is now 
> vlanxx and i don't whant that, but it still doesn't work with iptables.
> Seby,
> ____________________________________________________________
> SC. FO Comunicatii SRL.
> Sebastian Ionita
> Administrator Sistem
> mobil: 0720 600016
> tel fix: 0264 450456
>
> _______________________________________________
> Vlan mailing list
> [email protected]
> http://www.lanforge.com/mailman/listinfo/vlan
>
>