Re: vlans & kubuntu
Anthony Benjammin DeNardo III <[email protected]> Mon, 04 Dec 2006 15:37:32 -0700
| Newsgroups | gmane.linux.drivers.vlan |
|---|---|
| Message-ID | <[email protected]> |
ok, I misstated...pings do work, and broadcasts do also. I can get both pings and broadcasts to go out both the tagged and untagged interfaces. what I cannot do, is get a multicast to go out a tagged interface. Peter Stuge wrote: > On Mon, Dec 04, 2006 at 02:41:51PM -0700, Anthony Benjammin DeNardo III wrote: > >> is anyone successfully using vlans with kubuntu (a Debian derivative)? >> I have one NIC (Intel EtherExpress Pro 100b) in my kubuntu box, eth1 and >> eth1.182 (vlan 182) both up, and for the life of me I can't get anything >> to go out the eth1.182 interface. >> > > Not even a ping? > > > >> I've isolated my environment to the kubuntu box (server), an HP 2524 >> switch, and my laptop. there are 2 vlans on the switch. port 1 has >> vlan 201 untagged, and 182 tagged. >> > > I would suggest having all VLANs tagged on the trunk, for testing, > but.. > > > >> port 2 has 201 untagged, and port 3 has 182 untagged. the server >> is multicasting, and there are no configurations, settings, etc... >> that will allow me to receive the multicast when plugged into >> switch port 3. there is nothing else plugged into the switch. >> whether my laptop is addressed as 201 or 182, it always receives >> the multicast when plugged into port 2. >> > > ..this is a very clear indication that the switch is not doing what > you want. > > Please double-check the switch config and then test using only simple > pings. When ping is working properly everywhere, then move on to the > multicast. > > Please use different IP networks on the different VLANs, if only for > testing purposes. > > Please remove any default routes on the clients while testing. > > You should only be able to ping "within the network" with a setup > like that; ie. only reach the server on the respective eth1.x > address when only on one VLAN. > > > >> I'm about to try another OS, unless someone can confirm for me that >> this has worked for them. any suggestions appreciated :-) >> > > I haven't done multicasting over VLANs but many other VLAN setups. > > I don't think multicasting is special as long as you don't want to do > routing. > > Try unicast traffic first, if that doesn't work there are other > problems to solve before trying multicast traffic. :) > > > //Peter > _______________________________________________ > Vlan mailing list > [email protected] > http://www.candelatech.com/mailman/listinfo/vlan > -- ========================================================= | Anthony Ben'jammin' DeNardo III | | Network Multimedia Architect | | Academic Computing & Networking Services | | Colorado State University | | 970-297-3710 | | [email protected] | ========================================================= _______________________________________________ Vlan mailing list [email protected] http://www.candelatech.com/mailman/listinfo/vlan
ad3.vcf
(text/x-vcard, 360 B)
begin:vcard fn:ad3 n:DeNardo III;Anthony org:Colorado State University;Academic Computing & Networking Services adr:;;1018 Campus Delivery;Fort Collins;CO;80523-1018;USA email;internet:[email protected] title:Network Multimedia Architect tel;work:970.297.3710 tel;cell:970.297.3710 x-mozilla-html:FALSE url:http://www.colostate.edu/~ad3 version:2.1 end:vcard