Re: Support for Radeon 9100 IGP-integrated 3c920?
Ian Anderson <[email protected]> Mon, 15 Dec 2003 17:14:27 -0500
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <1071526467.4112.0.camel@dhcppc1> |
My diff:
618d617
< { 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM
},
619a619
>
relevant section of dmesg (showing both the on-board and installed
card):
kudzu: numerical sysctl 1 49 is obsolete.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:08.0: 3Com PCI 3c920B-EMB-WNM Tornado at 0xd480. Vers LK1.1.19
divert: allocating divert_blk for eth0
0000:01:09.0: 3Com PCI 3c905C Tornado at 0xdc00. Vers LK1.1.19
divert: allocating divert_blk for eth1
kudzu: numerical sysctl 1 49 is obsolete.
When trying to set up the network (Fedora Core 1)
eth1 (ATI/3Com/Realtek) = Determining IP information for eth1... failed;
no link present. Check cable?
eth2 (3Com Tornado) = 3c59x device eth2 does not seem to be present,
delaying initialization.
The 3Com Tornado works fine under 2.4.22-1.2129.nptl.
I'm not sure if part of the problem is because I have two 3Com cards in
one system, This is my primary system, so I'd rather not physically yank
the working card if I can help it.
Let me know if you need more information.
Ian
On Mon, 2003-12-15 at 06:11, Bogdan Costescu wrote:
> On Sun, 14 Dec 2003, Ian Anderson wrote:
>
> > ATI and Asus both advertise the integrated LAN controller as being
> > 3Com-compatible and using a Realtek PHY.
>
> That's an interesting combination :-)
>
> > I've tried a simple PCI Device ID insertion into 3c59x.c in 2.6.0-test11
> > but that came back as a negative.
>
> What do you mean by "came back as negative" ? Any error messages logged ?
--
Ian
_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex