Re: slow receive with 3cSOHO100-TX card / 3c59x drivers
Bogdan Costescu <[email protected]> Fri, 25 Feb 2005 11:09:37 +0100 (CET)
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <Pine.LNX.4.44.0502251106070.6727-100000@kenzo.iwr.uni-heidelberg.de> |
On Thu, 24 Feb 2005, Michael wrote: > mmoedt@0[~]$ mii-diag > Using the default interface 'eth0'. > SIOCGMIIPHY on eth0 failed: Operation not supported > ---------------------------------------------------------- Please provide the eth0-related log from /var/log/messages. This might show if the MII transceiver was found and initialized. If ethtool exists on your system, please run 'ethtool eth0'. > The autonegotiated capability is 01e0. > The autonegotiated media type is 100baseTx-FD. > Basic mode control register 0x3000: Auto-negotiation enabled. This means that the MII transceiver was found and that autonegotiation works - which is good. -- Bogdan Costescu IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868 E-mail: [email protected] _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex