Re: slow receive with 3cSOHO100-TX card / 3c59x drivers

Sorry, here's a little more, with debug=5:
(There seems to be a contradiction regarding the MII!)

Feb 25 19:48:40 sammy -- MARK --
Feb 25 19:52:21 sammy kernel: 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
Feb 25 19:52:21 sammy kernel: See
Documentation/networking/vortex.txt
Feb 25 19:52:21 sammy kernel: 0000:00:06.0: 3Com PCI 3cSOHO100-TX
Hurricane at 0xec00. Vers LK1.1.19
Feb 25 19:52:21 sammy kernel:  00:04:76:e8:0e:19, IRQ 10
Feb 25 19:52:21 sammy kernel:   product code 4d4d rev 00.12 date
03-19-02
Feb 25 19:52:21 sammy kernel:   8K byte-wide RAM 5:3 Rx:Tx split,
autoselect/10baseT interface.
Feb 25 19:52:21 sammy kernel:   MII transceiver found at address
24, status 784d.
Feb 25 19:52:21 sammy kernel:   Enabling bus-master transmits and
whole-frame receives.
Feb 25 19:52:21 sammy kernel: 0000:00:06.0: scatter/gather enabled.
h/w checksums enabled

root@0[~]# mii-diag
Using the default interface 'eth0'.
Basic registers of MII PHY #24:  ffff ffff ffff ffff ffff ffff ffff
ffff.
  No MII transceiver present!.
  Use '--force' to view the information anyway.

_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex