Re: IRQ routing problems with 6 NICs

On Fri, 22 Sep 2006, Raul Dias wrote:

> When I boot a 2.6.x kernel, all hell breaks loose.  I get all sort of
> IRQ problems with the NICs and only one or two works.

Yes, because the kernel doesn't seem to like the IRQ assignments and 
tries to change them. The file Documentation/kernel-parameters.txt 
from the kernel source also suggests:

pci=biosirq

The error message at the very end of your e-mail seems to come from 
the via-rhine driver. Could you disable this network chip (in BIOS as 
it's on-board) or make such that the driver is not loaded ? The 3c59x 
driver is supposed to be able to share interrupts, but the via-rhine 
one seems to be upset when it receives an interrupt that it didn't 
expect.

-- 
Bogdan Costescu

IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen
Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY
Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868
E-mail: [email protected]
_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex