Re: Problems with a 3c900 network adapter
Bogdan Costescu <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <Pine.LNX.4.44.0210211347240.16486-100000@kenzo.iwr.uni-heidelberg.de> |
On Mon, 21 Oct 2002, [iso-8859-1] Bogdan Hojda wrote: > and `/var/log/kern.log' says that eth0 is 10base2 interface -- `eth0: > Initial media type 10base2.' Probably you have this set as default in the EEPROM on the card. You could use the DOS-based utility from 3Com to change it to the media that you are actually using. Another thing that should work would be to force media type by adding some parameters on the kernel command line, see: http://www.scyld.com/network/vortex.html and/or Documentation/networking/vortex.txt in the kernel source tree. -- Bogdan Costescu IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868 E-mail: [email protected] _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex