Re: problems w/3c59x on 3CCFE575BT

Donald Becker <[email protected]>
Newsgroups gmane.linux.drivers.vortex.devel
Message-ID <[email protected]>
On Sun, 22 Dec 2002, dean gaudet wrote:
> # vortex-diag -ee -aa -m
> vortex-diag.c:v2.05 5/15/2001 Donald Becker ([email protected])
...
> Index #1: Found a 3CCFE575BT CardBus adapter at 0x4800.
...
> EEPROM contents (256 words, offset 0x30):
>  0x000: 10b7 5157 0007 0000 0001 0200 4000 0000
>  0x008: 0000 0000 0000 0000 0000 0000 0000 0000
>  0x010: 0000 0000 0000 0000 0090 0000 10b7 5b57
>  0x018: 0000 0000 0000 0000 0000 0000 0109 0a0a
>  0x020: 0000 0060 0000 0000 0000 0000 0000 0000
>  0x028: 0000 0000 0000 0000 0000 0000 0000 0000
>  0x030: 0050 04b4 e729 5157 c6fc 0036 4757 6d50
>  0x038: 3000 0009 0050 04b4 e729 2010 0000 0006
>  0x040: 32a6 1570 0000 0060 0007 0000 0000 00be

I checked this against the reference 3ccfe575bt that I have here at
the Scyld offices.  Except for the station address and date, the EEPROM
contents match the properly working device that I have here.

Verify that you are not passing in a module option.

>  MII PHY 0 at #0 transceiver registers:
>    3000 282d 0300 e54b 00a1 45e1 0001 0000

This transceiver model is slightly different than on my card.  Both are
TDK 78q2120 parts, but your transceiver is a newer rev. 11 chip (e543
vs. e54b).


-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993

_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.