Re: 3c920 in Dell docking station
Uncle George <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <[email protected]> |
yup, u are absatively correct. u have to go to a second screen to see the feature/NIC disabled. Now to see if it will behave properly with the rest of the network. /gat R M wrote: > I have a Dell 8200 with a 3c920 built-in to the laptop itself which > works with the 59x driver without problems. Check the laptop BIOS, in > mine there are some options for enable/disable the 3com card in a > docking station (dont have it with me so I can't get the exact wording). Donald Becker wrote: > On Mon, 10 Feb 2003, Uncle George wrote: > >>I have a laptop port replicator that has a 3c920 ( so the docs says ) in >>it. > > > What is the PCI ID? > The PCI ID is a pair of four digit numbers, the vendor ID and device. > You can use 'lspci -v -n' or 'cat /proc/pci' to find this information. > > >> [root@LaptopServer gat]# /sbin/insmod 3c59x >> Using /lib/modules/2.4.18-14/kernel/drivers/net/3c59x.o >> /lib/modules/2.4.18-14/kernel/drivers/net/3c59x.o: init_module: >> No such device >> Hint: insmod errors can be caused by incorrect module parameters, >> including invalid IO or IRQ parameters. >> You may find more information in syslog or the output from dmesg > > > Grrrr, if only we could get rid of this thoroughly outdated message. > _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex