Re: 3c905c 10Mb duplex queries
Donald Becker <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <[email protected]> |
On Mon, 24 Feb 2003, Richard Scobie wrote: > Donald Becker wrote: > >> RX packets:117503 errors:0 dropped:0 overruns:1 frame:0 > >> TX packets:14117 errors:0 dropped:0 overruns:0 carrier:14109 > > > >What driver version are you using? > >You can verify that the driver you are using actually sets the full > >duplex bit by running 'vortex-diag -a'. > > I am using your driver dated 18 Feb 01 from the 2.2.23 kernel. What driver version? (I think you'll find that it's not my release, but rather a modified driver.) > These are the vortex-diag stats when set to half duplex: > > Index #3: Found a 3c905C Tornado 100baseTx adapter at 0xe800. > Receive mode is 0x0f: Promiscuous. Errm, is that deliberate? .. > Transceiver type in use: Autonegotiate. > MAC settings: half-duplex. .. > And these are the stats when set to full duplex: > Index #3: Found a 3c905C Tornado 100baseTx adapter at 0xe800. .. > MAC settings: half-duplex. .. > It would seem that although register values are changed, the tranceiver > is staying in half duplex. Try using the release from scyld.com mkdir /tmp/netdrivers/ cd /tmp/netdrivers/ ncftpget ftp://ftp.scyld.com/pub/network/netdrivers.tgz tar xfvz netdrivers.tgz make make install If that fixes the problem, Bogdan or Andrew should verify that the driver in the kernel correctly records the MII-setting ioctl() data. -- Donald Becker [email protected] Scyld Computing Corporation http://www.scyld.com 410 Severn Ave. Suite 210 Scyld Beowulf cluster system Annapolis MD 21403 410-990-9993 _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex