vlan tagging support in 3c59x v0.99Y
Tristen Rasmussen <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel,gmane.linux.drivers.vortex.user |
|---|---|
| Message-ID | <[email protected]> |
Hi,
I'm having some trouble with getting vlan (802.1Q) support working with
the version v0.99Y (3c59x.c:v0.99Y 12/16/2002 Donald Becker) of the
3c59x.c driver with a 2.4.20 kernel.
I've got a cisco 1200 access point connected directly (via crossover
cable) to a 3com 3c905B NIC. By tracing the cisco's output logs, I can
see that it is indeed sending out a vlan id. However, I see no
indication of the vlan id in the incoming packet as received by the NIC
with the latest 3c59x driver.
Cisco output:
01:19:28 +4768.437500 Packet Alert: Enet Xmit: 00:0b:fd:ea:80:7f ->
00:10:5a:1b:c9:50
dot1dTpPort: src=1 dest=1 priority=0 vlanID=5
DIX: type IP
IP: IPv4 TCP 192.168.157.9 -> 192.168.150.210 ID=0x1184 totalLen=552
TCP: port [HTTP]80 -> 33779 seq=2036835655 ack=4126180638 dataOffset=5 flags=0x10 window=8192 urgentPointer=0
My ethereal trace for the NIC shows no indication of a VLAN id.
I loaded the compiled modules as follows:
insmod pci-scan
insmod 3c59x
Is there anything else I need to do to enable the vlan support?
BTW, I also have the 8021Q module loaded in the kernel too.
Thanks,
Tristen Rasmussen
--
Tristen Rasmussen <[email protected]>
_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex