Error with 3c59x , Kernel 2.4.20 (continuing)

still no answers, it's a pity. here is vortex-diag -a when the adapter is dead
does anybody have the slightest idea of what is going on ?

vortex-diag.c:v2.05 5/15/2001 Donald Becker ([email protected])
 http://www.scyld.com/diag/index.html
Index #1: Found a 3c900 Boomerang 10baseT adapter at 0xd800.
The Vortex chip may be active, so FIFO registers will not be read.
To see all register values use the '-f' flag.
Initial window 7, registers values by window:
  Window 0: 0000 0000 0000 0000 0000 00bf ffff 0000.
  Window 1: FIFO FIFO 0000 2000 0052 00ff 13fc 2000.
  Window 2: 6000 4a97 ccfa 0000 0000 0000 06c6 4000.
  Window 3: 02d8 0103 0000 0000 e108 0003 13ff 6000.
  Window 4: 0000 00cf 8800 0cc0 0000 88c0 0000 8000.
  Window 5: 1ffc fffc 06c6 0600 0007 06ce 06c6 a000.
  Window 6: 0000 0000 0000 0000 0000 0000 003c c000.
  Window 7: e388 0eee 0000 0000 0052 00ff 100c e000.
Vortex chip registers at 0xd800
  0xD810: **FIFO** 00000000 00000052 *STATUS*
  0xD820: 00000021 00000000 0e2bccc2 06000020
  0xD830: 0000e000 0000bb0a 0eeee170 00000000
 Indication enable is 06c6, interrupt enable is 06ce.
 No interrupt sources are pending.
 Transceiver/media interfaces available:  10baseT.
Transceiver type in use:  10baseT.
 MAC settings: half-duplex.
Maximum packet size is 0.
 Station address set to 00:60:97:4a:fa:cc.
 Configuration options 06c6.

_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex