Re: RedHat 3C59X and 3C509 issue and collisions
Bogdan Costescu <[email protected]>
| Newsgroups | gmane.linux.drivers.vortex.devel |
|---|---|
| Message-ID | <Pine.LNX.4.44.0306021332090.24272-100000@kenzo.iwr.uni-heidelberg.de> |
On Mon, 26 May 2003, Muso Gazza wrote: > The configuration is older Digital PC's with either 3C59X or 3C509 cards. Did these work before with some other Linux kernel or 3c59x driver ? > however this stops network connectivity completely. If you force full-duplex on a hub... you get what you wask for :-) > however there are no obvious errors on the virtual ttys. Media errors are not the obvious type that spits out big warning signs... > Any advice on how to trouble shoot this issue is appreciated. I'm afraid that you'll have to change the booting procedure a bit, at least for one computer with each kind of card and start Linux in a different way than kickstart. You should then use vortex-diag and mii-diag to check media settings (including the default ones in EEPROM) - normally everything should be set to auto/nway. -- Bogdan Costescu IWR - Interdisziplinaeres Zentrum fuer Wissenschaftliches Rechnen Universitaet Heidelberg, INF 368, D-69120 Heidelberg, GERMANY Telephone: +49 6221 54 8869, Telefax: +49 6221 54 8868 E-mail: [email protected] _______________________________________________ vortex mailing list [email protected] http://www.scyld.com/mailman/listinfo/vortex