Re: SuSe 8.2 3c905 question.

On Monday 16 June 2003 01:13, Steve Milo wrote:
> Hi Donald, sorry about replying so late.  Right after I sent out this
> email I decided to switch back to 8.0 (thats we have been using). 
> 8.0 worked with no problems at all, however I would be willing to
> give 8.2 another shot if I know what I should look for.
> Is the driver detection message found in the /var/log/messages file?
> Or the /var/log/boot.msg file?

On SuSE, the driver is normally loaded as a module, thus 
/var/log/messages is your best bet. In order to get SuSE 8.2 going, you 
can also try some of the noapic, pci=nobios, pci=biosirq, acpi=off 
kernel parameters.

Good luck,
Pete

> Thanks,
> Steve M
>
> On Thursday, Jun 12, 2003, at 17:17 America/Denver, Donald Becker 
wrote:
> > On Thu, 12 Jun 2003, Steve Milo wrote:
> >> Greetings all, I am currently responsible for installing 8.2 on a
> >> server here and I believe I am having a problem with the 3c905c
> >> driver.
> >>
> >> ifstatus eth0 shows me what I believe to be an ff:ff:ff:ff:ff:ff
> >> MAC
> >
> > What is the driver detection message?
> >
> > --
> > Donald Becker				[email protected]
> > Scyld Computing Corporation		http://www.scyld.com
> > 914 Bay Ridge Road, Suite 220		Scyld Beowulf cluster system
> > Annapolis MD 21403			410-990-9993


_______________________________________________
vortex mailing list
[email protected]
http://www.scyld.com/mailman/listinfo/vortex