Re: build a hack box of choice?

You have just spec'd newer GEODE (233) based soekris board.

But you don't need that much horsepower for an Access Point really.

Bruno Lopes F. Cabral wrote:
> Hi
> 
> Brian Wilson wrote:
> 
>> Watch out!! Long posting!! Sorry about that but I have stuff to say! :-)
>>
>> Let's spec this thing.
>>
>> Really you'd want a PC card slot to allow any WiFi radio to be used
>> but beyond that isn't the rest of the hardware pretty generic?  Don't
>> get carried away adding sound and video and USB. (I'd love them but
>> let's keep it as cheap as possible.) How does this sound?
>>
>>     Geode processor (133 or 233?) (x86 per Keith's suggestion)
> 
> 
> 233/266
> 
>>     16 MB ram (or 32 if cost effective - is it enough?)
> 
> 
> 32/64 adds a few dollars only
> 
>>     8 MB flash (how much?)
> 
> 
> I'd prefer a CF slot (to boot like an ATA IDE drive)
> 
>>     10/100 ether w/POE
>>     9 pin serial port
>>     A few LED's under software control.
>>     WiFi card
>>     Power supply
> 
> 
> you just described pcengines.com WRAP board, with the
> only difference mr. Dornier choosed mini-pci instead
> of pccard
> 
> the x86 thing would easy things because most of us, mortals,
> knows x86 because we have PC's. so, if the hardware is
> standard enough, you can build/debug on PC and package
> it on the unit just when it is ready
> 
> Cheers
> !3runo
> 
> _______________________________________________
> LinuxAP-dev mailing list
> [email protected]
> http://linuxAP.ksmith.com/mailman/listinfo/linuxap-dev