S3C4510B was Re: isl3893.sf.net project created

Hello there

here I have a few 4510b hardwares laying around, but absolutely
NO CLUE on how to install a bootloader so I can boot linux on
them

I also have the JTAG working (using armtool), SERIAL level
shifter, cross-compiler environment... all them working
(tested/used with cx84200 port I worked on, but this used
the SMC bootloader which loads kernel and ramdisk, easying
my life a lot!)

bios-lt uClinux-dist is somewhat confusing for a "newbie"
(all I wan't was to compile the bootloader and put it into
a unit), so any help on documenting this simple step would
be _greatelly_ appreciated!

Cheers
!3runo




Henrion Benjamin wrote:
>>I've been quitely following your efforts for a while now.
>>Can you tell me if anyone has managed to get inside the Dell 1184 access 
>>point?  I believe that it one of the class of APs you describe.
> 
> No, the Dell 1184 is a samsung s3c4510b based.
> 
> If want to access to the flash on this box, you can use the version of
> jtag-tools patched by p2. It's in debian unstable.
> 
> If someone has a Dell 1184 (I think this one has a Prism2 chipset), it
> would be nice to have linuxap running on that box.
> 
> Someone owns such hardware?