Re: Samsung4510 Wireless Hacking Session

Henrion Benjamin <[email protected]> Mon, 20 Oct 2003 19:02:40 +0200
Newsgroups gmane.linux.drivers.wireless.access-point
Message-ID <20031020170240.GA6863@localhost>
Christopher R. Hertel <[email protected]> [031020]:
> I was wondering... Would the eCos RedBoot work on this?

Yes, Peter ([email protected]) says redboot should runs on samsung4510, but
could be larger than the current bios-lt.

It seems that the code of bios-lt has been cleaned, I need to compare
what has been don to see. More flash chips have been added.

Peter, can you try the bios-lt? and tftp booting?

> On Mon, Oct 20, 2003 at 04:45:12PM +0200, Henrion Benjamin wrote:
> > Bruno Lopes F. Cabral <[email protected]> [031020]:
> > > Hello there
> > > 
> > > Henrion Benjamin wrote:
> > > > We were at a meeting this weekend to port linux on several APs:
> > > 
> > > very good! nice to hear that!
> > > 
> > > > There's very high probability that we will succeed in porting linux for
> > > > those boards (listed on the pages above) because we have access to JTAG:
> > > 
> > > if I recall correctly the dell true mobile 1184 doesn't have a JTAG
> > > connector. if so, buying/making a JTAG cable could help to "revive"
> > > them
> > > 
> > > > We are currently trying to modify the bios of dailzh.com for our board
> > > > (DI-614+revA).
> > > 
> > > did you try to get the boot loader from www.ucrouter.org/english ??
> > > it is also samsung4510 based and there are reports of their original
> > > boot code (ROM) working on various soho-routers out there
> > 
> > I will have a look. Another guy has posted a link on the ucrouter.ru
> > forum:
> > 
> > BIOS for Samsung S3C4510B
> > 
> > http://sourceforge.net/projects/bios-lt/
> > 
> > Seems that we've some luck...We were just saying yesterday during the
> > hacking party that we wanted to rewrite a bootloader for this cpu. Don't
> > know if it's supports tftp, but we'll try...
> > 
> > > 
> > > my only doubt on this uClinux-thing is how to boot the code.
> > > I have a pretty good idea on the rest (kernel/romfs image)
> > > but no clue on bios-less boot code
> > > 
> > > after that, porting linuxap should be a walk on the park ;-)
> > > 
> > > Cheers
> > > !3runo
> > > from Brazil
> > > 
> > > _______________________________________________
> > > LinuxAP-dev mailing list
> > > [email protected]
> > > http://linuxAP.ksmith.com/mailman/listinfo/linuxap-dev
> > 
> > -- 
> > Benjamin Henrion <[email protected]>
> > http://bh.udev.org
> > 
> > _______________________________________________
> > LinuxAP-dev mailing list
> > [email protected]
> > http://linuxAP.ksmith.com/mailman/listinfo/linuxap-dev
> 
> -- 
> "Implementing CIFS - the Common Internet FileSystem" ISBN: 013047116X
> Samba Team -- http://www.samba.org/     -)-----   Christopher R. Hertel
> jCIFS Team -- http://jcifs.samba.org/   -)-----   ubiqx development, uninq.
> ubiqx Team -- http://www.ubiqx.org/     -)-----   [email protected]
> OnLineBook -- http://ubiqx.org/cifs/    -)-----   [email protected]
> 
> _______________________________________________
> LinuxAP-dev mailing list
> [email protected]
> http://linuxAP.ksmith.com/mailman/listinfo/linuxap-dev

-- 
Benjamin Henrion <[email protected]>
http://bh.udev.org