Consistent oops w/0.2.2

Hi,

I've consistently been getting the following oops when loading the
orinoco-usb driver with my Compaq W200 card since the 2.6.2-bk-something
(it happens in 2.6.5-rc2 as well).

Any suggestions/fixes?

/usr/src/kits/orinoco-usb-0.2.2/driver/orinoco_usb.c: bridge_access_ltv:
in urb not pending
Badness in local_bh_enable at kernel/softirq.c:122
Call Trace:
 [<c0124a95>] local_bh_enable+0x85/0x87
 [<e0c79407>] bridge_access_ltv+0x151/0x31a [orinoco_usb]
 [<e0c79721>] bridge_read_ltv+0x8e/0x90 [orinoco_usb]
 [<e0c6b65b>] __orinoco_ev_info+0x289/0x40f [orinoco]
 [<e0c7a403>] bridge_bulk_in_callback+0x1c6/0x2d2 [orinoco_usb]
 [<e0c51635>] td_free+0x65/0x6b [ohci_hcd]
 [<c0260ebd>] usb_hcd_giveback_urb+0x25/0x39
 [<e0c51798>] finish_urb+0x96/0x12a [ohci_hcd]
 [<e0c529da>] dl_done_list+0x117/0x11c [ohci_hcd]
 [<e0c5339f>] ohci_irq+0x8a/0x16b [ohci_hcd]
 [<c0260f07>] usb_hcd_irq+0x36/0x67
 [<c010b31a>] handle_IRQ_event+0x3a/0x64
 [<c010b687>] do_IRQ+0x94/0x136
 [<c0109bd8>] common_interrupt+0x18/0x20
 [<c01ebefa>] acpi_processor_idle+0xd5/0x1c7
 [<c010709f>] cpu_idle+0x2c/0x35
 [<c03a6717>] start_kernel+0x190/0x1cf
 [<c03a644b>] unknown_bootoption+0x0/0x110

/usr/src/kits/orinoco-usb-0.2.2/driver/orinoco_usb.c: Non specific state =
2
/usr/src/kits/orinoco-usb-0.2.2/driver/orinoco_usb.c: orinoco_usb: access
failed(2) reply_count 34 (resetting)
/usr/src/kits/orinoco-usb-0.2.2/driver/orinoco_usb.c: orinoco_usb: ctx fa=
iled

// Thomas

--=20
Waiting for the inspiration to hit me...