Re: Problem after change HW

Hi,
debug log is on http://z80.ynet.sk/x/evms-engine.log
I have discover, that mdadm --examine report:
mdadm: No md superblock detected on /dev/sdb  and sdc
hda and hdb are ok
I also see on evmsn that sdb and sdc have BBRseg and I'm not sure that 
there was only LocalDskMgr on that disks (hda and hdb have it).

Pavol

On Mon, 4 Jun 2007, Steve Dobbelstein wrote:

> T|Ck <[email protected]> wrote on 06/03/2007 05:47:17 PM:
>
>> HI,
>> I have problem with md region after change hardware.
>> My disks change devices (sdc -> sdb, etc.)
>> On evmsn I see /dev/evms/md/md1 and all disks are active, but I cant save
>
>> (Save failed. Invalid argument.)
>> I have kernel 2.6.21.2 and evms 2.5.5
>> Here is complete log:
>> http://z80.ynet.sk/x/evms-engine.log
>
> Please run evmsn with the debug level set to "debug", i.e., "evmsn -d
> debug", and re-post the log file.  The default debug level does not put
> much information into the log.
>
> Steve D.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Evms-devel mailing list
[email protected]
To subscribe/unsubscribe, please visit:
https://lists.sourceforge.net/lists/listinfo/evms-devel