EVMS and hard drive hotplug

hello
i have server with hardware raid controller
i created new raid array that exported to OS as "/dev/sdf" drive .
after that i started evmsgui , it complained something about partition
table on new disk , i said "no".
after that i closed evmsgui without saving , and removed array i just created .
now when i open evmsgui again it report about IO error on /dev/sdf/,
and i still see /dev/sdf in hard drive list and /dev/evms/sdf in
volume list ( i didnt create this volume , it was created
automatically ).
what might be a reason for  such behaviour  ?
as i understand , evms should just scan existing hard drives and show
drives and volumes that found..
maybe it RAID controller's  driver problem ( it doesn't report to OS
that drive removed ) ?
or it normal behaviour and it will be ok after restart?


i have following errors in /var/log/messages

sd 1:2:3:0: SCSI error: return code = 0x40000
end_request: I/O error, dev sdf, sector 0
sd 1:2:3:0: SCSI error: return code = 0x40000
end_request: I/O error, dev sdf, sector 0
sd 1:2:3:0: SCSI error: return code = 0x40000
end_request: I/O error, dev sdf, sector 128
sd 1:2:3:0: SCSI error: return code = 0x40000


Thanks.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/
_______________________________________________
Evms-devel mailing list
[email protected]
To subscribe/unsubscribe, please visit:
https://lists.sourceforge.net/lists/listinfo/evms-devel