Re: EVMS problem

I was able to fix the problem with a few steps with help from folks at the
gentoo forums.  The discussion is detailed here:

http://forums.gentoo.org/viewtopic-t-595202.html

Ultimately, I found some discussion from the IRC logs that led to the
commands that helped:

mdadm --stop /dev/md1
mdadm -A /dev/md1 -f /dev/evms/.nodes/hdc1 /dev/evms/.nodes/sdb1
/dev/evms/.nodes/sdc1 /dev/evms/.nodes/sdd1 /dev/evms/.nodes/sde1
/dev/evms/.nodes/sdf1

Cheers,
-Michael

On 10/8/07, Steinar H. Gunderson <[email protected]> wrote:
>
> On Sat, Oct 06, 2007 at 11:35:25PM -0400, hardhead wrote:
> > I know I *could* potentially rebuild the raid with mdadm -a
> > /dev/sda1, but I'm not sure how EVMS would react to that
>
> FWIW, if you use /dev/evms/.nodes/sda1 instead, it's perfectly safe.
>
> I recently saw your problem, but didn't find a good solution.
>
> /* Steinar */
> --
> Homepage: http://www.sesse.net/
>

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/

_______________________________________________
Evms-devel mailing list
[email protected]
To subscribe/unsubscribe, please visit:
https://lists.sourceforge.net/lists/listinfo/evms-devel