Re: Array inexplicably degrades itself, but no stale objects to remove

> MDRaid1RegMgr: Region md/md1 is currently in degraded mode.  To
> bring it back to normal state, add 0 new spare device to replace the faulty
> or missing device.

Search for "add 0 new spare" and you'll find that several other people,
including me on this list about a year ago, have reported the same problem. IIRC
I solved it on my host by removing the allegedly faulty object, rebuilding it,
and reinserting it into the RAID array.  I don't know what caused the problem,
but at least in my case it hasn't come back.

In your case where the problem keeps recurring, if there's a permanent solution
that will keep it from happening again, I'm not aware of it.  Sorry :(

Andrew


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Evms-devel mailing list
[email protected]
To subscribe/unsubscribe, please visit:
https://lists.sourceforge.net/lists/listinfo/evms-devel