Re: 2 newbie questions...

Have you installed portmap daemon?
Try to restart it!

Good Luck.


Luke Alexander wrote:

>Hi All,
>
>Just a couple of issues that someone is bound to be able to help me
>with.
>
>Have installed failsafe for linux, on a standard redhat 7.2 build using
>the rpms from SGI, everything installed OK - did the --nodeps switch to
>install the tcpmux rpm, and then created xinetd.d file to enable tcpmux
>as a service, added the necessary lines to /etc/services - restarted
>xinetd and then started the fs_cluster daemons, they all seemed to start
>OK.
>
>When trying to connect to GUI, it reports fatal error: Unable to
>connect to CAM daemon on xxx, tried running fs_cluster restart but get
>the same error, I have now also repeated the same installation process
>on a Redhat 7.1 build (I was lead to believe that the rpms were built
>for 7.1), and have different errors on starting the fs_cluster:
>
>Starting Cluster Services:
>Cluster Control processes could not be restarted
>
>On the 7.1 install only two of the three log files have been created:
>
>cdbd_log and cmond_log
>
>On 7.2 all three logs have been created although I cannot find anything
>to suggest an answer as to why the GUI is unable to connect.
>
>It seems to me like a possible Catch 22 situation: the GUI won't start
>without the config database being defined, and I want to use the GUI to
>define the config database...
>
>Any help much appreciated,
>
>Thanks - 
>
>here are some parts of the log files:
>
>7.2 cad_log:
>
>Thu Jun 27 13:09:30.967 <cam_cascdb 17600:3076> cdb key not found
>#global#machines. cdb error 7
>Thu Jun 27 13:09:30.973 <cam_cicdb 17601:4101> cdb key not found
>#local#HA#resources. cdb error 10
>Thu Jun 27 13:09:36.135 <cad 17604:7176> cfs_fs_connect: fs_cam_register
>failed with error FailSafe is not ready to accept admin requests.
>Thu Jun 27 13:09:36.216 <cad 17604:7176> cdb key not found #cluster. cdb
>error 7
>
>
>7.1 cdbd_log:
>
>Mon Jul  1 11:39:07.474 qluster3 cdbd  - fs2d: couldn't register as a
>TCP service
>Mon Jul  1 11:39:07.475 qluster3 cdbd  - fs2d_init: cannot open
>database, error 3
>Mon Jul  1 11:39:07.475 qluster3 cdbd  - Initialization failed
>
>
>7.1 cmond_log:
>
>Mon Jul  1 11:17:37.863 <cmond 564:1024> Beginning reconfiguration.
>Mon Jul  1 11:17:37.864 <cmond 564:1024> Reconfiguration done.
>Mon Jul  1 11:17:38.004 <cmond 564:1024> Could not open configuration
>database.
>Mon Jul  1 11:17:38.004 <cmond 564:1024> New client request have
>arrived.
>Mon Jul  1 11:17:38.004 <cmond 564:1024> Serving request #1.
>Mon Jul  1 11:17:38.004 <cmond 564:1024> Request = restart cluster_admin
>REPLY|FORCE.
>Mon Jul  1 11:17:38.004 <cmond 564:1024> Beginning restart cluster_admin
>REPLY|FORCE.
>Mon Jul  1 11:17:38.005 <cmond 564:1024> Killing cad:1243, sending
>SIGTERM.
>Mon Jul  1 11:17:38.109 <cmond 564:1024> Starting process cad.
>Mon Jul  1 11:17:38.109 <cmond 564:1024> Going to fork/exec new process
>"cad -l -lf /var/log/failsafe/cad_log --append_log".
>Mon Jul  1 11:17:38.109 <cmond 564:1024> New process cad pid 2434
>Mon Jul  1 11:17:38.124 <cmond 564:1024> Successfully finishing restart
>cluster_admin REPLY|FORCE.
>Mon Jul  1 11:17:38.124 <cmond 564:1024> Process group cluster_admin is
>in running state.
>Mon Jul  1 11:17:38.124 <cmond 564:1024> Request served successfully.
>Mon Jul  1 11:17:38.124 <cmond 564:1024> Sending reply for request #1.
>Mon Jul  1 11:17:38.124 <cmond 564:1024> 0 processes have exited.
>Mon Jul  1 11:38:17.746 <cmond 2806:1024> Cmond restarted, using log
>level info.
>Mon Jul  1 11:38:17.849 <cmond 2806:1024> Creating process group table.
>Mon Jul  1 11:38:17.849 <cmond 2806:1024> Enabling client requests.
>Mon Jul  1 11:38:17.849 <cmond 2806:1024> Installing signal handlers.
>Mon Jul  1 11:38:17.849 <cmond 2806:1024> Attempting cdb registration.
>Mon Jul  1 11:38:17.978 <cmond 2806:1024> Could not open configuration
>database.
>Mon Jul  1 11:38:17.978 <cmond 2806:1024> Cdb registration failed, will
>continueretyring until successful.
>Mon Jul  1 11:38:17.978 <cmond 2806:1024> Initiating autoactions.
>Mon Jul  1 11:38:17.979 <cmond 2806:1024> Reading configuration
>information for process group cluster_admin.
>Mon Jul  1 11:38:17.979 <cmond 2806:1024> Configuration for process
>group cluster_admin.
>Mon Jul  1 11:38:17.979 <cmond 2806:1024>         Type = cluster_admin
>Mon Jul  1 11:38:17.979 <cmond 2806:1024>         Procs = cad 
>Mon Jul  1 11:38:17.979 <cmond 2806:1024>         Actions = start stop
>restart detach attach status    
>Mon Jul  1 11:38:17.979 <cmond 2806:1024> Reading configuration
>information for process group cluster_control.
>Mon Jul  1 11:38:17.980 <cmond 2806:1024> Configuration for process
>group cluster_control.
>Mon Jul  1 11:38:17.980 <cmond 2806:1024>         Type = cluster_control
>Mon Jul  1 11:38:17.980 <cmond 2806:1024>         Procs = crsd 
>Mon Jul  1 11:38:17.980 <cmond 2806:1024>         Actions = start stop
>restart detach attach status    
>Mon Jul  1 11:38:17.980 <cmond 2806:1024> Reading configuration
>information for process group cluster_hainfra.
>Mon Jul  1 11:38:17.980 <cmond 2806:1024> Configuration for process
>group cluster_hainfra.
>Mon Jul  1 11:38:17.980 <cmond 2806:1024>         Type = cluster_hainfra
>Mon Jul  1 11:38:17.980 <cmond 2806:1024>         Procs = ha_cmsd ha_gcd
>ha_srmd 
>Mon Jul  1 11:38:17.980 <cmond 2806:1024>         Actions = start stop
>restart detach attach status    
>Mon Jul  1 11:38:17.980 <cmond 2806:1024> Reading configuration
>information for process group ip_addresses.
>Mon Jul  1 11:38:17.981 <cmond 2806:1024> Configuration for process
>group ip_addresses.
>Mon Jul  1 11:38:17.981 <cmond 2806:1024>         Type = cluster_agent
>Mon Jul  1 11:38:17.981 <cmond 2806:1024>         Procs = ha_ifd 
>Mon Jul  1 11:38:17.981 <cmond 2806:1024>         Actions = start stop
>restart detach attach status    
>Mon Jul  1 11:38:17.981 <cmond 2806:1024> Reading configuration
>information for process group cluster_failsafe.
>Mon Jul  1 11:38:17.981 <cmond 2806:1024> Configuration for process
>group cluster_failsafe.
>Mon Jul  1 11:38:17.981 <cmond 2806:1024>         Type = cluster_ha
>Mon Jul  1 11:38:17.981 <cmond 2806:1024>         Procs = ha_fsd 
>Mon Jul  1 11:38:17.981 <cmond 2806:1024>         Actions = start stop
>restart detach attach status    
>Mon Jul  1 11:38:17.981 <cmond 2806:1024> Beginning autoaction
>cluster_admin .
>Mon Jul  1 11:38:17.981 <cmond 2806:1024> autoaction is start action.
>Mon Jul  1 11:38:17.982 <cmond 2806:1024> Starting process cad.
>Mon Jul  1 11:38:17.982 <cmond 2806:1024> Going to fork/exec new process
>"cad -l -lf /var/log/failsafe/cad_log --append_log".
>Mon Jul  1 11:38:17.983 <cmond 2806:1024> New process cad pid 2839
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Successfully finishing
>autoaction cluster_admin .
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Beginning autoaction
>cluster_control .
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> autoaction is attach action.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Looking for process crsd to
>attach to.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> autoaction cluster_control 
>failed - could not access object.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Beginning autoaction
>ip_addresses .
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> autoaction is attach action.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Looking for process ha_ifd to
>attach to.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> autoaction ip_addresses 
>failed - could not access object.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Beginning autoaction
>cluster_hainfra .
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> autoaction is attach action.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Looking for process ha_cmsd to
>attach to.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Looking for process ha_gcd to
>attach to.
>Mon Jul  1 11:38:17.997 <cmond 2806:1024> Looking for process ha_srmd to
>attach to.
>Mon Jul  1 11:38:17.998 <cmond 2806:1024> autoaction cluster_hainfra 
>failed - could not access object.
>Mon Jul  1 11:38:17.998 <cmond 2806:1024> Beginning autoaction
>cluster_failsafe .
>Mon Jul  1 11:38:17.998 <cmond 2806:1024> autoaction is attach action.
>Mon Jul  1 11:38:17.998 <cmond 2806:1024> Looking for process ha_fsd to
>attach to.
>Mon Jul  1 11:38:17.998 <cmond 2806:1024> autoaction cluster_failsafe 
>failed - could not access object.
>Mon Jul  1 11:38:17.998 <cmond 2806:1024> Autoactions done.
>Mon Jul  1 11:38:27.989 <cmond 2806:1024> 0 processes have exited.
>Mon Jul  1 11:38:28.125 <cmond 2806:1024> Could not open configuration
>database.
>Mon Jul  1 11:38:38.119 <cmond 2806:1024> 0 processes have exited.
>Mon Jul  1 11:38:38.256 <cmond 2806:1024> Could not open configuration
>database.
>Mon Jul  1 11:38:48.249 <cmond 2806:1024> 0 processes have exited.
>Mon Jul  1 11:38:48.388 <cmond 2806:1024> Could not open configuration
>database.
>Mon Jul  1 11:38:49.709 <cmond 2806:1024> Process with pid 2839 has
>exited with status 256
>Mon Jul  1 11:38:49.709 <cmond 2806:1024> 1 processes have exited.
>Mon Jul  1 11:38:49.709 <cmond 2806:1024> Process cad:2839 of group
>cluster_admin exited, status = 1.
>Mon Jul  1 11:38:49.709 <cmond 2806:1024> Initiating recovery for
>process group cluster_admin.
>Mon Jul  1 11:38:51.719 <cmond 2806:1024> Starting process cad.
>Mon Jul  1 11:38:51.719 <cmond 2806:1024> Going to fork/exec new process
>"cad -l -lf /var/log/failsafe/cad_log --append_log".
>Mon Jul  1 11:38:51.719 <cmond 2806:1024> New process cad pid 3132
>Mon Jul  1 11:38:51.720 <cmond 2806:1024> Recovery for process group
>cluster_admin complete.
>
>
>
>_______________________________________________
>LinuxFailSafe mailing list
>[email protected]
>http://lists.community.tummy.com/mailman/listinfo/linuxfailsafe
>