help

unsubscribe

> -----Original Message-----
> From:	[email protected]
> [SMTP:[email protected]]
> Sent:	Tuesday, September 09, 2003 7:00 PM
> To:	[email protected]
> Subject:	LinuxFailSafe digest, Vol 1 #575 - 1 msg
> 
> Send LinuxFailSafe mailing list submissions to
> 	[email protected]
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.community.tummy.com/mailman/listinfo/linuxfailsafe
> or, via email, send a message with subject or body 'help' to
> 	[email protected]
> 
> You can reach the person managing the list at
> 	[email protected]
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of LinuxFailSafe digest..."
> 
> 
> Today's Topics:
> 
>    1. failsafe on redhat advanced server 2.1 (Michael Paul)
> 
> --__--__--
> 
> Message: 1
> From: "Michael Paul" <[email protected]>
> To: <[email protected]>
> Date: Tue, 9 Sep 2003 16:33:45 +0200
> Subject: [LinuxFailSafe] failsafe on redhat advanced server 2.1
> 
> Hi all
> 
> I installed failsafe as described in the README file.
> For the node and resource definition I used the following script.
> 
> Everything seems to be fine but there are no resources located on my node.
> How does the interconnection between the 2 nodes work? I have a ethernet
> and
> a serial connection, but I would prefer the ethernet connection.
> something is wrong with the interconnection.
> can anyone help me
> 
> mipa
> 
> ###################################################################
> 
> [root@testnode1 root]# tail /var/log/failsafe/crsd_testnode1
> 
>                 * * * L o g g i n g    R e s t a r t e d * * *
> 
> Tue Sep  9 16:15:33.166 <N crsd crs 14744:0 crsd_main.c:200> Crsd
> restarted.
> Tue Sep  9 16:15:34.114 <W crsd crs 14744:0 crsd_pending.c:490>
> CI_CRSERR_INVAL, The node specified for monitoring has its controlled port
> disabled. Ignoring this request.
> Tue Sep  9 16:16:03.367 <W crsd crs 14744:0 crsd_pending.c:490>
> CI_CRSERR_INVAL, The node specified for monitoring has its controlled port
> disabled. Ignoring this request.
> Tue Sep  9 16:16:04.377 <W crsd crs 14744:0 crsd_pending.c:490>
> CI_CRSERR_INVAL, The node specified for monitoring has its controlled port
> disabled. Ignoring this request.
> Tue Sep  9 16:16:05.390 <W crsd crs 14744:0 crsd_pending.c:490>
> CI_CRSERR_INVAL, The node specified for monitoring has its controlled port
> disabled. Ignoring this request.
> Tue Sep  9 16:16:34.676 <W crsd crs 14744:0 crsd_pending.c:920>
> CI_CRSERR_INVAL, The node specified for a reset request has its controlled
> port disabled. Ignoring this request.
> Tue Sep  9 16:17:44.901 <W crsd crs 14744:0 crsd_pending.c:490>
> CI_CRSERR_INVAL, The node specified for monitoring has its controlled port
> disabled. Ignoring this request.
> 
> ###################################################################
> 
> logfile /var/log/failsafe/ifd_testnode1:
> 
>                 * * * L o g g i n g    R e s t a r t e d * * *
> 
> Tue Sep  9 16:16:00.296 <W ha_ifd ifd 14790:0 ifd_net.c:681> CI_FAILURE,
> lo
> is neither broadcast, point-to-point, nor loopback
> 
> Tue Sep  9 16:16:00.296 <I0 ha_ifd ifd 14790:0 ifd_main.c:346> ha_ifd
> monitoring network interfaces
> Tue Sep  9 16:16:24.397 <E ha_ifd ifd 14790:0 ifd_net.c:605> CI_FAILURE,
> interface eth0 is sick: Check cables
> Tue Sep  9 16:16:24.398 <I0 ha_ifd ifd 14790:0 ifd_net.c:381> CI_FAILURE,
> marking interface eth0 as SICK
> Tue Sep  9 16:17:11.697 <I0 ha_ifd ifd 14790:0 ifd_net.c:442> interface
> eth0
> has been restored
> Tue Sep  9 16:17:28.747 <E ha_ifd ifd 14790:0 ifd_net.c:605> CI_FAILURE,
> interface eth0 is sick: Check cables
> Tue Sep  9 16:17:28.748 <I0 ha_ifd ifd 14790:0 ifd_net.c:381> CI_FAILURE,
> marking interface eth0 as SICK
> Tue Sep  9 16:17:45.207 <I0 ha_ifd ifd 14790:0 ifd_net.c:442> interface
> eth0
> has been restored
> 
> ###################################################################
> 
> [root@testnode1 root]# ifconfig -a
> eth0      Link encap:Ethernet  HWaddr 00:80:AD:87:16:F7
>           inet addr:192.168.80.1  Bcast:192.168.80.0  Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:21345 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:21391 errors:3 dropped:0 overruns:0 carrier:2
>           collisions:0
>           RX bytes:15367490 (14.6 Mb)  TX bytes:15435978 (14.7 Mb)
> 
> eth1      Link encap:Ethernet  HWaddr 00:04:76:E0:BF:19
>           inet addr:141.201.80.98  Bcast:141.201.80.255
> Mask:255.255.255.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:434180 errors:0 dropped:0 overruns:1 frame:0
>           TX packets:224889 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0
>           RX bytes:43633918 (41.6 Mb)  TX bytes:40029276 (38.1 Mb)
> 
> lo        Link encap:Local Loopback
>           inet addr:127.0.0.1  Mask:255.0.0.0
>           UP LOOPBACK RUNNING  MTU:16436  Metric:1
>           RX packets:680624 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:680624 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0
>           RX bytes:64032854 (61.0 Mb)  TX bytes:64032854 (61.0 Mb)
> 
> ###################################################################
> 
> define node testnode1
> set hostname to testnode1.plus.sbg.ac.at
> set nodeid to 1
> set sysctrl_type to null
> set sysctrl_status to disabled
> set sysctrl_password to *******
> set sysctrl_owner to testnode2
> set sysctrl_device to /dev/ttyS0
> set sysctrl_owner_type to tty
> add nic 192.168.80.1
>      set heartbeat to true
>      set ctrl_msgs to true
>      set priority to 1
> done
> add nic 141.201.80.98
>      set heartbeat to true
>      set ctrl_msgs to true
>      set priority to 2
> done
> done
> 
> 
> define node testnode2
> set hostname to testnode2.plus.sbg.ac.at
> set nodeid to 2
> set sysctrl_type to null
> set sysctrl_status to disabled
> set sysctrl_password to *****
> set sysctrl_owner to  testnode1
> set sysctrl_device to /dev/ttyS0
> set sysctrl_owner_type to tty
> add nic 192.168.80.2
>      set heartbeat to true
>      set ctrl_msgs to true
>      set priority to 1
> done
> add nic 141.201.80.202
>      set heartbeat to true
>      set ctrl_msgs to true
>      set priority to 2
> done
> done
> 
> define cluster test
> set notify_cmd to /usr/bin/mail
> set notify_addr to root <at> testnode1.plus.sbg.ac.at root <at>
> testnode2.plus.sbg.ac.at
> add node testnode1
> add node testnode2
> done
> 
> 
> define failover_policy testnode1-primary
> set attribute to Auto_Failback
> set attribute to Auto_Recovery
> set script to ordered
> set domain to testnode1 testnode2
> done
> 
> 
> define failover_policy testnode2-primary
> set attribute to Auto_Failback
> set attribute to InPlace_Recovery
> set script to ordered
> set domain to testnode2 testnode1
> done
> 
> 
> define resource 141.201.80.99 of resource_type IP_address in cluster test
> set NetworkMask to 0xffffff00
> set interfaces to eth1
> set BroadcastAddress to 141.201.80.255
> done
> 
> 
> define resource 141.201.80.100 of resource_type IP_address in cluster test
> set NetworkMask to 0xffffff00
> set interfaces to eth1
> set BroadcastAddress to 141.201.80.255
> done
> 
> 
> define resource_group testnode1-group in cluster test
> set failover_policy to testnode1-primary
> add resource 141.201.80.100 of resource_type IP_address
> done
> 
> 
> define resource_group testnode2-group in cluster test
> set failover_policy to testnode2-primary
> add resource 141.201.80.99 of resource_type IP_address
> done
> 
> quit
> _________________________________________________________________
> Michael Paul
> University of Salzburg/ZID
> Hellbrunnerstrasse34
> A-5020 Salzburg, Austria
> 
>     Tel: +43(0)662 8044 6746/6711
>     Fax: +43(0)662 8044 173
>     E-Mail: [email protected]
> 
> 
> 
> --__--__--
> 
> _______________________________________________
> LinuxFailSafe mailing list
> [email protected]
> http://lists.community.tummy.com/mailman/listinfo/linuxfailsafe
> 
> 
> End of LinuxFailSafe Digest