rivafb woes...
Saurabh Nanda <[email protected]>
| Newsgroups | gmane.linux.fbdev.user |
|---|---|
| Message-ID | <[email protected]> |
Hi,
Been trying to get my system work with the framebuffer but have some
troubles.
I compiled 2.4.19 with the
* VGA Text Console
* Video Mode Selection Support
* Support for frame buffer devices
* nVidia Riva Support
* VESA VGA Graphics Console
I have a Riva TNT2 32MB.
When I try to go into the video mode "314" (or any other mode) I always
get /dev/fb0 with the following resolution:
mode "640x480-60"
# D: 25.176 MHz, H: 31.469 kHz, V: 59.942 Hz
geometry 640 480 640 480 8
timings 39721 40 24 32 11 96 2
accel true
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : nVidia RIVA-VTNT
Address : 0xde000000
Size : 33554432
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 1
YPanStep : 1
YWrapStep : 0
LineLength : 640
MMIO Address: 0xdc000000
MMIO Size : 16777216
Accelerator : Unknown (28)
And /dev/fb1 with the following:
mode "800x600-75"
# D: 48.001 MHz, H: 46.876 kHz, V: 75.121 Hz
geometry 800 600 800 600 16
timings 20833 96 32 16 4 96 4
rgba 5/11,6/5,5/0,0/0
endmode
Frame buffer device information:
Name : VESA VGA
Address : 0xde000000
Size : 33554432
Type : PACKED PIXELS
Visual : TRUECOLOR
XPanStep : 0
YPanStep : 0
YWrapStep : 0
LineLength : 1600
Accelerator : No
I do not understand what is happening.
I have also attached my dmesg output along with this message.
Thanks in advance...
Saurabh Nanda
dmesg
(text/plain, 6.8 KB)
Linux version 2.4.19 (root@psycho) (gcc version 2.95.3 20010315 (release)) #4 Wed Sep 11 23:33:49 IST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000008000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 128MB LOWMEM available. Advanced speculative caching feature not present On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=rivafb ro root=301 BOOT_FILE=/boot/rivafb Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Detected 551.271 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1097.72 BogoMIPS Memory: 127528k/131072k available (993k kernel code, 3160k reserved, 276k data, 244k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel Pentium III (Katmai) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 551.2587 MHz. ..... host bus clock speed is 100.2286 MHz. cpu: 0, clocks: 1002286, slice: 501143 CPU0<T0:1002272,T1:501120,D:9,S:501143,C:1002286> mtrr: v1.40 (20010327) Richard Gooch ([email protected]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb150, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0596] at 00:07.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV4 framebuffer ver 0.9.3 (RIVA-VTNT2, 32MB @ 0xDE000000) vesafb: abort, cannot reserve video memory at 0xde000000 vesafb: framebuffer at 0xde000000, mapped to 0xcb80f000, size 32768k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:03c5 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb1: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt82c596a (rev 09) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:pio, hdd:DMA hda: SAMSUNG SV0842D, ATA DISK drive hdc: SAMSUNG SV4002H, ATA DISK drive hdd: CRD-8482B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 16514064 sectors (8455 MB) w/472KiB Cache, CHS=1092/240/63, UDMA(33) hdc: 78242976 sectors (40060 MB) w/1945KiB Cache, CHS=77622/16/63, UDMA(33) hdd: ATAPI 48X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 < hda5 hda6 > hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 > floppy0: no floppy controllers found NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 244k freed Real Time Clock Driver v1.10e Adding Swap: 136040k swap-space (priority -1) Adding Swap: 262544k swap-space (priority 1) reiserfs:warning: CONFIG_REISERFS_CHECK is set ON reiserfs:warning: - it is slow mode for debugging. reiserfs: checking transaction log (device 03:06) ... journal-1153: found in header: first_unflushed_offset 3083, last_flushed_trans_id 174983 journal-1206: Starting replay from offset 3083, trans_id 174984 journal-1299: Setting newest_mount_id to 438 Using r5 hash to sort names ReiserFS version 3.6.25 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide1(22,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. reiserfs:warning: CONFIG_REISERFS_CHECK is set ON reiserfs:warning: - it is slow mode for debugging. reiserfs: checking transaction log (device 16:03) ... journal-1153: found in header: first_unflushed_offset 8115, last_flushed_trans_id 232453 journal-1206: Starting replay from offset 8115, trans_id 232454 journal-1299: Setting newest_mount_id to 279 Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs:warning: CONFIG_REISERFS_CHECK is set ON reiserfs:warning: - it is slow mode for debugging. reiserfs: checking transaction log (device 16:05) ... journal-1153: found in header: first_unflushed_offset 2247, last_flushed_trans_id 156689 journal-1206: Starting replay from offset 2247, trans_id 156690 journal-1299: Setting newest_mount_id to 237 Using r5 hash to sort names ReiserFS version 3.6.25 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide1(22,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. 8139too Fast Ethernet driver 0.9.25 PCI: Found IRQ 10 for device 00:0b.0 PCI: Sharing IRQ 10 with 00:0c.1 eth0: RealTek RTL8139 Fast Ethernet at 0xcdabf000, 00:02:44:05:fc:7c, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting half-duplex based on auto-negotiated partner ability 0000.