Re: rivafb + NV17

Hi Tony,

The directfb works great -- I can now play movies in the framebuffer
and the quality is as good as in x-windows (even though my fb.mode
has a depth of 8). CPU usage is below 50% (and that is running the
CPU at half speed using cpufreq), while in X it's around 75%. Very
cool actually.

A quirk in the framebuffer: if I touch the mouse while playing a movie
with mplayer, everything freezes and I have to hardboot. I can't even
ssh into the machine. I wanted the mousewheel as a way of fast
forwarding in the movie.

I'm also wondering if it's possible to tell the rivafb module to use
the right mode when loading -- at the moment it loads into 640x480
and then I use fbset to change it to 1280x854. Here's the first
entry in my /etc/fb.modes:

    #
    #   Sample video modes
    #

    #  Generated using modeline2fb, 1280x854, 85.266 MHz dotclock

    mode "fullscreen"
      geometry   1280 854   1280 26201   8
      timings    11728   240 16   31 0   256 7
      hsync low
      vsync low
    endmode

The module doesn't seem to accept mode parameters, however.

>>The main remaining annoyance is that you can't remove the rivafb module,
>>    
>>
>You can actually, as long as you don't enable the framebuffer console. This
>sequence should work:
>
>modprobe rivafb
>mplayer -vo directfb
>rmmod rivafb
>
>Of course you will only have a vga console.
>  
>
Not sure I understand -- you don't mean I can insert rivafb while
the nvidia module is still inserted? In that case I get this:


       ---------------------- DirectFB v0.9.20 ---------------------
             (c) 2000-2002  convergence integrated media GmbH
             (c) 2002-2003  convergence GmbH
        -----------------------------------------------------------

(*) Single Application Core. (with MMX support) (2004-01-20 10:18)
(*) DirectFB/misc/memcpy: using MMXEXT optimized memcpy()
(!) DirectFB/core/fbdev: Error opening `/dev/fb0'!
    --> No such device
(!) DirectFB/Core: Could not initialize 'system' core!
    --> Not supported!
(!) DirectFB/Core: Error during initialization (Not supported!)
vo_directfb2.c <315>:
        (#) DirectFBError [DirectFBCreate (&dfb)]: Not supported!

Not surprising, right? The framebuffer device /dev/fb0 is not created.
So what does it mean to use directfb without enabling the framebuffer
console?

>The rivafb driver and nv should nicely coexist.  The nvidia driver is still
>not compatible with rivafb.
>  
>
Good point, I'll try that.

Cheers,
Dave




-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click