DirectFB radeon output

DirectFB output with VDR & softdevice plugin works ok with an mga card,
but I'm struggling with radeon output. The screen goes all black, and
the strange thing is that if I start up the Xorg server after this, the
Xv output windows is also completely black, but with OSD shown. Any
ideas?

[root@vigor10 softdevice]# cat /etc/directfbrc
mode=720x576
depth=32

[root@vigor10 softdevice]# dfbinfo
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.

       ---------------------- DirectFB v0.9.21 ---------------------
             (c) 2000-2002  convergence integrated media GmbH
             (c) 2002-2004  convergence GmbH
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2005-01-24 13:32)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5494)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5495)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: ATI Radeon 0.2 (Michel Dnzer)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)


Screen (00) Radeon Primary Screen           (primary screen)
   Caps: VSYNC POWER_MANAGEMENT

     Layer (00) FBDev Primary Layer             (primary layer)
        Type:    GRAPHICS
        Caps:    SURFACE BRIGHTNESS CONTRAST SATURATION

     Layer (01) Radeon Overlay
        Type:    GRAPHICS VIDEO STILL_PICTURE
        Caps:    SURFACE OPACITY ALPHACHANNEL SCREEN_LOCATION
SRC_COLORKEY DST_COLORKEY


Input (01) IMPS/2 Mouse                    (primary mouse)
   Type: MOUSE
   Caps: AXES BUTTONS

Input (00) Keyboard                        (primary keyboard)
   Type: KEYBOARD
   Caps: KEYS

[root@vigor10 VDR]# ./rundfb
[softdevice] processing args
[softdevice]   argv [0] = softdevice
[softdevice]   argv [1] = -vo
arg: /dev/cdrom
[setup-softdevice] alsa device set to: hw:0,2
[setup-softdevice] A/V Offset set to (-8)
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] deinterlace method set to 1 lavc
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (YUV2)
[setup-softdevice] startup aspect set to (16:9 wide)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg version(0.4.9-pre1) build(4736)
[dfb] init
(*) DirectFB/Config: Parsing config file '/etc/directfbrc'.

       ---------------------- DirectFB v0.9.21 ---------------------
             (c) 2000-2002  convergence integrated media GmbH
             (c) 2002-2004  convergence GmbH
        -----------------------------------------------------------

(*) DirectFB/Core: Single Application Core. (2005-01-24 13:32)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'PS/2 Input' (INPUT, 5505)...
 (!!!)  *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [reactor.c:802]
(*) DirectFB/Input: IMPS/2 Mouse 1.0 (Convergence GmbH)
(*) Direct/Thread: Running 'Keyboard Input' (INPUT, 5506)...
(*) DirectFB/Input: Keyboard 0.9 (convergence integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: ATI Radeon 0.2 (Michel Dnzer)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 67108864 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine Blit
All
[dfb] Drawing Flags: none
[dfb] Surface Blitting Flags: SrcColorkey
[dfb] Supported video Modes are: 640x480@8 640x480@8 640x480@8 640x480@8
640x480@8 800x600@8 800x600@8 800x600@8 800x600@8 800x600@8 800x600@8
800x600@8 800x600@8 1024x768@8 1024x768@8 1024x768@8 1024x768@8
1024x768@8 1024x768@8 1024x768@8 1152x864@8 1152x864@8 1152x864@8
1152x864@8 1152x864@8 1152x864@8 1024x1024@8 1280x1024@8 1280x1024@8
1280x1024@8 1280x1024@8 1280x1024@8 1600x1200@8 1600x1200@8 1600x1200@8
1280x720@16 1280x720@32 720x576@32
[dfb] Enumeratig display Layers
Layer 0 FBDev Primary Layer  Type: graphics
  Caps: brightness contrast saturation surface
Layer 1 Radeon Overlay  Type: graphics picture video
  Caps: alphachannel dst_colorkey opacity screen_location src_colorkey
surface
[dfb] width = 720, height = 576
[dfb] got fmt = 0x00400c03 bpp = 32
[dfb] Using this layer for OSD: (FBDev Primary Layer - [720x576])
osdSurface::
 - videoonly
 - flipping
videoSurface::
 - videoonly
[dfb] Configuring CooperativeLevel for Overlay
[dfb] Configuring ColorKeying
[dfb] Configuring CooperativeLevel for OSD
[dfb] Using this layer for OSD: FBDev Primary Layer
[dfb] Using this layer for Video out: Radeon Overlay
[dfb] (re)configuring Videolayer to 720 x 576 (720x576)
[dfb] creating new surface
[dfb] (re)configured 0x00200806
[softdevice] Video Out seems to be OK
[softdevice] Initializing Audio Out
[softdevice] Audio out seems to be OK
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder
cSoftDevice::MakePrimaryDevice
 (!!!)  *** ONCE [only copying/scaling blits supported for YUV in
software] *** [generic.c:3998 in gAcquire()]
[softdevice] allocating picture buffer for resolution 720x576
[dfb] (re)configuring Videolayer to 720 x 576 (720x576)
[dfb] creating new surface
[dfb] (re)configured 0x00200806



-- 
Torgeir Veimo <[email protected]>



-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl