Re: Atyfb: Screen garbled on Fujitsu FMV-253L

> Please post the boot messages from atyfb so I can
> confirm that your case is similar.

Kernel command line: root=/dev/hda3 resume=/dev/hda1 video=atyfb:xclk:63
atyfb: using auxiliary register aperture
atyfb: 3D RAGE Mobility P/M (Mach64 LR, PCI) [0x4c52 rev 0x64]
atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000.
atyfb: BIOS frequency table:
atyfb: PCLK_min_freq 984, PCLK_max_freq 23600, ref_freq 2950, ref_divider 64
atyfb: MCLK_pwd 4200, MCLK_max_freq 8300, XCLK_max_freq 12500, SCLK_freq 5000
atyfb: BIOS contains driver information table.
atyfb: colour active matrix monitor detected: 1024x512 Wide TFT Panel
atyfb:        id=7, 1024x512 pixels, 262144 colours (LT mode)
atyfb:        supports refresh rates [60], default 60 Hz
atyfb:        LCD CRTC parameters: 39.1795  1024 1032 1120 1184  512 513 527 
550
atyfb:                           : 25595 64 1024 8 88 23 512 1 14
atyfb: 4M SDRAM (2:1) (32-bit), 29.498928 MHz XTAL, 236 MHz PLL, 83 Mhz MCLK, 
63 MHz XCLK
atyfb: fb0: ATY Mach64 frame buffer device on PCI

As already mentioned, works flawlessly with full resolution now!

> > Where can I find proper docs for the driver? (In
> > the usual place aka. the source?)
>
> Yes.

I should have guessed ;) I was fooled by the aty128fb.txt docs in 
kernel-source Documentation/fb/

Thanks,
  Stephan

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/